nthseqset

 

Wiki

The master copies of EMBOSS documentation are available at http://emboss.open-bio.org/wiki/Appdocs on the EMBOSS Wiki.

Please help by correcting and extending the Wiki pages.

Function

Read and write (return) one set of sequences from many

Description

nthseqset writes to file a single sequence alignment (set) from an input stream of sequence sets. The sequence set is specified by number, which is the order it appears in the input file. The output file name may be specified.

Usage

Here is a sample session with nthseqset


% nthseqset -osf phylip 
Read and write (return) one set of sequences from many
Input sequence set(s): globins-all.phy
The number of the sequence set to output [1]: 2
output sequence(s) [globins-all.phylip]: 

Go to the input files for this example
Go to the output files for this example

Command line arguments

Read and write (return) one set of sequences from many
Version: EMBOSS:6.6.0.0

   Standard (Mandatory) qualifiers:
  [-sequence]          seqsetall  Sequence set(s) filename and optional
                                  format, or reference (input USA)
   -number             integer    [1] The number of the sequence set to output
                                  (Integer 1 or more)
  [-outseq]            seqoutall  [.] Sequence set(s)
                                  filename and optional format (output USA)

   Additional (Optional) qualifiers: (none)
   Advanced (Unprompted) qualifiers:
   -feature            boolean    Use feature information

   Associated qualifiers:

   "-sequence" associated qualifiers
   -sbegin1            integer    Start of each sequence to be used
   -send1              integer    End of each sequence to be used
   -sreverse1          boolean    Reverse (if DNA)
   -sask1              boolean    Ask for begin/end/reverse
   -snucleotide1       boolean    Sequence is nucleotide
   -sprotein1          boolean    Sequence is protein
   -slower1            boolean    Make lower case
   -supper1            boolean    Make upper case
   -scircular1         boolean    Sequence is circular
   -squick1            boolean    Read id and sequence only
   -sformat1           string     Input sequence format
   -iquery1            string     Input query fields or ID list
   -ioffset1           integer    Input start position offset
   -sdbname1           string     Database name
   -sid1               string     Entryname
   -ufo1               string     UFO features
   -fformat1           string     Features format
   -fopenfile1         string     Features file name

   "-outseq" associated qualifiers
   -osformat2          string     Output seq format
   -osextension2       string     File name extension
   -osname2            string     Base file name
   -osdirectory2       string     Output directory
   -osdbname2          string     Database name to add
   -ossingle2          boolean    Separate file for each entry
   -oufo2              string     UFO features
   -offormat2          string     Features format
   -ofname2            string     Features file name
   -ofdirectory2       string     Output directory

   General qualifiers:
   -auto               boolean    Turn off prompts
   -stdout             boolean    Write first file to standard output
   -filter             boolean    Read first file from standard input, write
                                  first file to standard output
   -options            boolean    Prompt for standard and additional values
   -debug              boolean    Write debug output to program.dbg
   -verbose            boolean    Report some/full command line options
   -help               boolean    Report command line options and exit. More
                                  information on associated and general
                                  qualifiers can be found with -help -verbose
   -warning            boolean    Report warnings
   -error              boolean    Report errors
   -fatal              boolean    Report fatal errors
   -die                boolean    Report dying program messages
   -version            boolean    Report version number and exit

Qualifier Type Description Allowed values Default
Standard (Mandatory) qualifiers
[-sequence]
(Parameter 1)
seqsetall Sequence set(s) filename and optional format, or reference (input USA) Readable sets of sequences Required
-number integer The number of the sequence set to output Integer 1 or more 1
[-outseq]
(Parameter 2)
seqoutall Sequence set(s) filename and optional format (output USA) Writeable sequence(s) <*>.format
Additional (Optional) qualifiers
(none)
Advanced (Unprompted) qualifiers
-feature boolean Use feature information Boolean value Yes/No No
Associated qualifiers
"-sequence" associated seqsetall qualifiers
-sbegin1
-sbegin_sequence
integer Start of each sequence to be used Any integer value 0
-send1
-send_sequence
integer End of each sequence to be used Any integer value 0
-sreverse1
-sreverse_sequence
boolean Reverse (if DNA) Boolean value Yes/No N
-sask1
-sask_sequence
boolean Ask for begin/end/reverse Boolean value Yes/No N
-snucleotide1
-snucleotide_sequence
boolean Sequence is nucleotide Boolean value Yes/No N
-sprotein1
-sprotein_sequence
boolean Sequence is protein Boolean value Yes/No N
-slower1
-slower_sequence
boolean Make lower case Boolean value Yes/No N
-supper1
-supper_sequence
boolean Make upper case Boolean value Yes/No N
-scircular1
-scircular_sequence
boolean Sequence is circular Boolean value Yes/No N
-squick1
-squick_sequence
boolean Read id and sequence only Boolean value Yes/No N
-sformat1
-sformat_sequence
string Input sequence format Any string  
-iquery1
-iquery_sequence
string Input query fields or ID list Any string  
-ioffset1
-ioffset_sequence
integer Input start position offset Any integer value 0
-sdbname1
-sdbname_sequence
string Database name Any string  
-sid1
-sid_sequence
string Entryname Any string  
-ufo1
-ufo_sequence
string UFO features Any string  
-fformat1
-fformat_sequence
string Features format Any string  
-fopenfile1
-fopenfile_sequence
string Features file name Any string  
"-outseq" associated seqoutall qualifiers
-osformat2
-osformat_outseq
string Output seq format Any string  
-osextension2
-osextension_outseq
string File name extension Any string  
-osname2
-osname_outseq
string Base file name Any string  
-osdirectory2
-osdirectory_outseq
string Output directory Any string  
-osdbname2
-osdbname_outseq
string Database name to add Any string  
-ossingle2
-ossingle_outseq
boolean Separate file for each entry Boolean value Yes/No N
-oufo2
-oufo_outseq
string UFO features Any string  
-offormat2
-offormat_outseq
string Features format Any string  
-ofname2
-ofname_outseq
string Features file name Any string  
-ofdirectory2
-ofdirectory_outseq
string Output directory Any string  
General qualifiers
-auto boolean Turn off prompts Boolean value Yes/No N
-stdout boolean Write first file to standard output Boolean value Yes/No N
-filter boolean Read first file from standard input, write first file to standard output Boolean value Yes/No N
-options boolean Prompt for standard and additional values Boolean value Yes/No N
-debug boolean Write debug output to program.dbg Boolean value Yes/No N
-verbose boolean Report some/full command line options Boolean value Yes/No Y
-help boolean Report command line options and exit. More information on associated and general qualifiers can be found with -help -verbose Boolean value Yes/No N
-warning boolean Report warnings Boolean value Yes/No Y
-error boolean Report errors Boolean value Yes/No Y
-fatal boolean Report fatal errors Boolean value Yes/No Y
-die boolean Report dying program messages Boolean value Yes/No Y
-version boolean Report version number and exit Boolean value Yes/No N

Input file format

nthseqset reads one or more nucleotiode or protein sequences.

The input is a standard EMBOSS sequence query (also known as a 'USA').

Major sequence database sources defined as standard in EMBOSS installations include srs:embl, srs:uniprot and ensembl

Data can also be read from sequence output in any supported format written by an EMBOSS or third-party application.

The input format can be specified by using the command-line qualifier -sformat xxx, where 'xxx' is replaced by the name of the required format. The available format names are: gff (gff3), gff2, embl (em), genbank (gb, refseq), ddbj, refseqp, pir (nbrf), swissprot (swiss, sw), dasgff and debug.

See: http://emboss.sf.net/docs/themes/SequenceFormats.html for further information on sequence formats.

Input files for usage example

File: globins-all.phy

 7 164
HBB_HUMAN --------VH LTPEEKSAVT ALWGKVN-VD EVGGEALGR- LLVVYPWTQR
HBB_HORSE --------VQ LSGEEKAAVL ALWDKVN-EE EVGGEALGR- LLVVYPWTQR
HBA_HUMAN ---------- ----VLSPAD KTNVKAA-WG KVGAHAGEYG AEALERMFLS
HBA_HORSE ---------- ----VLSAAD KTNVKAA-WS KVGGHAGEYG AEALERMFLG
MYG_PHYCA -------VLS EGEWQLVLHV WAKVEAD-VA GHGQDILIR- LFKSHPETLE
GLB5_PETMAPIVDTGSVAP LSAAEKTKIR SAWAPVYSTY ETSGVDILVK FFTSTPAAQE
LGB2_LUPLU--------GA LTESQAALVK SSWEEFNANI PKHTHRFFIL VLEIAPAAKD

          FFESFGDLST PDAVMGNPKV KAHGKKVLGA FSDGLAHLDN LKGTFATLSE
          FFDSFGDLSN PGAVMGNPKV KAHGKKVLHS FGEGVHHLDN LKGTFAALSE
          FPTTKTYFPH FDLSHGSAQV KGHGKKVADA LTNAVAHVDD MPNALSALSD
          FPTTKTYFPH FDLSHGSAQV KAHGKKVGDA LTLAVGHLDD LPGALSNLSD
          KFDRFKHLKT EAEMKASEDL KKHGVTVLTA LGAILKKKGH HEAELKPLAQ
          FFPKFKGLTT ADQLKKSADV RWHAERIINA VNDAVASMDD TEKMSMKLRD
          LFSFLKGTSE VPQNNPELQA HAGKVFKLVY EAAIQLQVTG VVVTDATLKN

          LHCDKLH--V DPENFRLLGN VLVCVLAHHF GKEFTPPVQA AYQKVVAGVA
          LHCDKLH--V DPENFRLLGN VLVVVLARHF GKDFTPELQA SYQKVVAGVA
          LHAHKLR--V DPVNFKLLSH CLLVTLAAHL PAEFTPAVHA SLDKFLASVS
          LHAHKLR--V DPVNFKLLSH CLLSTLAVHL PNDFTPAVHA SLDKFLSSVS
          SHATKHK--I PIKYLEFISE AIIHVLHSRH PGDFGADAQG AMNKALELFR
          LSGKHAK--S FQVDPQYFKV LAAVIADTVA AGDAGFEKLM SMICILLRSA
          LGSVHVSKGV ADAHFPVVKE AILKTIKEVV GAKWSEELNS AWTIAYDELA

          NALAHKYH-- ----
          NALAHKYH-- ----
          TVLTSKYR-- ----
          TVLTSKYR-- ----
          KDIAAKYKEL GYQG
          Y--------- ----
          IVIKKEMNDA A---
 7 167
HBB_HUMAN --------VH LTPEEKSAVT ALWGKVN--V DEVGGEALGR LLVVYPWTQR
HBB_HORSE --------VQ LSGEEKAAVL ALWDKVN--E EEVGGEALGR LLVVYPWTQR
HBA_HUMAN ---------V LSPADKTNVK AAWGKVGAHA GEYGAEALER MFLSFPTTKT
HBA_HORSE ---------V LSAADKTNVK AAWSKVGGHA GEYGAEALER MFLGFPTTKT
GLB5_PETMAPIVDTGSVAP LSAAEKTKIR SAWAPVYSTY ETSGVDILVK FFTSTPAAQE
MYG_PHYCA ---------V LSEGEWQLVL HVWAKVEADV AGHGQDILIR LFKSHPETLE
LGB2_LUPLU--------GA LTESQAALVK SSWEEFNANI PKHTHRFFIL VLEIAPAAKD

          FFESFGDLST PDAVMGNPKV KAHGKKVLGA FSDGLAHLDN -----LKGTF
          FFDSFGDLSN PGAVMGNPKV KAHGKKVLHS FGEGVHHLDN -----LKGTF
          YFPHF-DLS- ----HGSAQV KGHGKKVADA LTNAVAHVDD -----MPNAL
          YFPHF-DLS- ----HGSAQV KAHGKKVGDA LTLAVGHLDD -----LPGAL
          FFPKFKGLTT ADQLKKSADV RWHAERIINA VNDAVASMDD T--EKMSMKL
          KFDRFKHLKT EAEMKASEDL KKHGVTVLTA LGAILKKKGH -----HEAEL
          LFSFLKGTSE VP--QNNPEL QAHAGKVFKL VYEAAIQLQV TGVVVTDATL

          ATLSELHCDK LHVDPENFRL LGNVLVCVLA HHFGKEFTPP VQAAYQKVVA
          AALSELHCDK LHVDPENFRL LGNVLVVVLA RHFGKDFTPE LQASYQKVVA
          SALSDLHAHK LRVDPVNFKL LSHCLLVTLA AHLPAEFTPA VHASLDKFLA
          SNLSDLHAHK LRVDPVNFKL LSHCLLSTLA VHLPNDFTPA VHASLDKFLS
          RDLSGKHAKS FQVDPQYFKV LAAVIADTVA AG-------- -DAGFEKLMS
          KPLAQSHATK HKIPIKYLEF ISEAIIHVLH SRHPGDFGAD AQGAMNKALE
          KNLGSVHVSK G-VADAHFPV VKEAILKTIK EVVGAKWSEE LNSAWTIAYD

          GVANALAHKY H------
          GVANALAHKY H------
          SVSTVLTSKY R------
          SVSTVLTSKY R------
          MICILLRSAY -------
          LFRKDIAAKY KELGYQG
          ELAIVIKKEM NDAA---

Output file format

The output is a standard EMBOSS sequence file.

The results can be output in one of several styles by using the command-line qualifier -osformat xxx, where 'xxx' is replaced by the name of the required format. The available format names are: embl, genbank, gff, pir, swiss, dasgff, debug, listfile, dbmotif, diffseq, excel, feattable, motif, nametable, regions, seqtable, simple, srs, table, tagseq.

See: http://emboss.sf.net/docs/themes/SequenceFormats.html for further information on sequence formats.

The output is the specified ordinal sequence set from the input USA.

In the example, the second sequence set from the input file will be written out to the specified output file.

Output files for usage example

File: globins-all.phylip

 7 167
HBB_HUMAN --------VH LTPEEKSAVT ALWGKVN--V DEVGGEALGR LLVVYPWTQR
HBB_HORSE --------VQ LSGEEKAAVL ALWDKVN--E EEVGGEALGR LLVVYPWTQR
HBA_HUMAN ---------V LSPADKTNVK AAWGKVGAHA GEYGAEALER MFLSFPTTKT
HBA_HORSE ---------V LSAADKTNVK AAWSKVGGHA GEYGAEALER MFLGFPTTKT
GLB5_PETMAPIVDTGSVAP LSAAEKTKIR SAWAPVYSTY ETSGVDILVK FFTSTPAAQE
MYG_PHYCA ---------V LSEGEWQLVL HVWAKVEADV AGHGQDILIR LFKSHPETLE
LGB2_LUPLU--------GA LTESQAALVK SSWEEFNANI PKHTHRFFIL VLEIAPAAKD

          FFESFGDLST PDAVMGNPKV KAHGKKVLGA FSDGLAHLDN -----LKGTF
          FFDSFGDLSN PGAVMGNPKV KAHGKKVLHS FGEGVHHLDN -----LKGTF
          YFPHF-DLS- ----HGSAQV KGHGKKVADA LTNAVAHVDD -----MPNAL
          YFPHF-DLS- ----HGSAQV KAHGKKVGDA LTLAVGHLDD -----LPGAL
          FFPKFKGLTT ADQLKKSADV RWHAERIINA VNDAVASMDD T--EKMSMKL
          KFDRFKHLKT EAEMKASEDL KKHGVTVLTA LGAILKKKGH -----HEAEL
          LFSFLKGTSE VP--QNNPEL QAHAGKVFKL VYEAAIQLQV TGVVVTDATL

          ATLSELHCDK LHVDPENFRL LGNVLVCVLA HHFGKEFTPP VQAAYQKVVA
          AALSELHCDK LHVDPENFRL LGNVLVVVLA RHFGKDFTPE LQASYQKVVA
          SALSDLHAHK LRVDPVNFKL LSHCLLVTLA AHLPAEFTPA VHASLDKFLA
          SNLSDLHAHK LRVDPVNFKL LSHCLLSTLA VHLPNDFTPA VHASLDKFLS
          RDLSGKHAKS FQVDPQYFKV LAAVIADTVA AG-------- -DAGFEKLMS
          KPLAQSHATK HKIPIKYLEF ISEAIIHVLH SRHPGDFGAD AQGAMNKALE
          KNLGSVHVSK G-VADAHFPV VKEAILKTIK EVVGAKWSEE LNSAWTIAYD

          GVANALAHKY H------
          GVANALAHKY H------
          SVSTVLTSKY R------
          SVSTVLTSKY R------
          MICILLRSAY -------
          LFRKDIAAKY KELGYQG
          ELAIVIKKEM NDAA---

Data files

None.

Notes

In EMBOSS, when an application has to write out many sequences, they are typically all written to a single file. This default behaviour can be changed by using the qualifier -ossingle which forces each sequence to be written to its own file.

The program seqretsplit will take a file containing many sequences and will output many files, each containing one sequence. However you have no choice over the naming of the files - they are named after the ID name fo the sequence they contain.

References

None.

Warnings

None.

Diagnostic Error Messages

None.

Exit status

It always exits with a status of 0.

Known bugs

None.

See also

Program name Description
aligncopy Read and write alignments
aligncopypair Read and write pairs from alignments
biosed Replace or delete sequence sections
codcopy Copy and reformat a codon usage table
cutseq Remove a section from a sequence
degapseq Remove non-alphabetic (e.g. gap) characters from sequences
descseq Alter the name or description of a sequence
entret Retrieve sequence entries from flatfile databases and files
extractalign Extract regions from a sequence alignment
extractfeat Extract features from sequence(s)
extractseq Extract regions from a sequence
featcopy Read and write a feature table
featmerge Merge two overlapping feature tables
featreport Read and write a feature table
feattext Return a feature table original text
listor Write a list file of the logical OR of two sets of sequences
makenucseq Create random nucleotide sequences
makeprotseq Create random protein sequences
maskambignuc Mask all ambiguity characters in nucleotide sequences with N
maskambigprot Mask all ambiguity characters in protein sequences with X
maskfeat Write a sequence with masked features
maskseq Write a sequence with masked regions
newseq Create a sequence file from a typed-in sequence
nohtml Remove mark-up (e.g. HTML tags) from an ASCII text file
noreturn Remove carriage return from ASCII files
nospace Remove whitespace from an ASCII text file
notab Replace tabs with spaces in an ASCII text file
notseq Write to file a subset of an input stream of sequences
nthseq Write to file a single sequence from an input stream of sequences
pasteseq Insert one sequence into another
revseq Reverse and complement a nucleotide sequence
seqcount Read and count sequences
seqret Read and write (return) sequences
seqretsetall Read and write (return) many sets of sequences
seqretsplit Read sequences and write them to individual files
sizeseq Sort sequences by size
skipredundant Remove redundant sequences from an input set
skipseq Read and write (return) sequences, skipping first few
splitsource Split sequence(s) into original source sequences
splitter Split sequence(s) into smaller sequences
trimest Remove poly-A tails from nucleotide sequences
trimseq Remove unwanted characters from start and end of sequence(s)
trimspace Remove extra whitespace from an ASCII text file
union Concatenate multiple sequences into a single sequence
vectorstrip Remove vectors from the ends of nucleotide sequence(s)
yank Add a sequence reference (a full USA) to a list file

Author(s)

Peter Rice
European Bioinformatics Institute, Wellcome Trust Genome Campus, Hinxton, Cambridge CB10 1SD, UK

Please report all bugs to the EMBOSS bug team (emboss-bug © emboss.open-bio.org) not to the original author.

History

Target users

This program is intended to be used by everyone and everything, from naive users to embedded scripts.

Comments

None