tcode

 

Wiki

The master copies of EMBOSS documentation are available at http://emboss.open-bio.org/wiki/Appdocs on the EMBOSS Wiki.

Please help by correcting and extending the Wiki pages.

Function

Identify protein-coding regions using Fickett TESTCODE statistic

Description

tcode identifies protein-coding regions in one or more DNA sequences using the fickett TESTCODE statistic. This is based on simple and universal differences between protein-coding and noncoding DNA. The TESTCODE statistic is calculated for windows of a specified size over each input sequence. The results can be output as a standard EMBOSS report file or displayed graphically.

The output reports each window as "Coding", "Noncoding" or "No opinion". Entries marked "No opinion" have a TESTCODE value that falls between the maximum and minimum values required to report a region as noncoding or coding. For the graphical plot, all points above a green horizontal line are determined to be coding regions. Those below a red line are determined to be noncoding. Points between the red and green lines are "no opinion" ones.

Biological Relevance

The statistic reflects the fact that codons are used with unequal frequency and that oligonucleotides and nucleotides tend to be repeated with a periodicity of three.

This application can assist in determining the probability of a region of nucleic sequence encoding a functional protein.

Algorithm

The Fickett (1982) algorithm is used (1).

A window of at least 200 bases is moved over the sequence in steps of 3 bases

Let:

  A1 = Number of A's in positions 1,4,7 ...
  A2 = Number of A's in positions 2,5,8 ...
  A3 = Number of A's in positions 3,6,9 ...

A position value is determined that reflects the degree to which each base is favoured in one codon position over another, i.e.

  Apos = MAX(A1,A2,A3) / MIN(A1,A2,A3)+1

This is done for all 4 bases. The percentage composition of each base is also determined. Eight values are therefore determined, four position values and four composition values. These are then converted to probabilities (p) of coding using a look-up table provided as the data file for the program. The values in this look-up table have been determined experimentally using known coding and noncoding sequences.

Each of the probabilities is multiplied by a weight (w) value (again from the look-up table) for the respective base. The weight value reflects the percentage of the time that each parameter alone successfully predicted coding or noncoding function for the sequences of known function.

The TESTCODE statistic is then:

  p1w1 + p2w2 + p3w3 + p4w4 + p5w5 + p6w6 + p7w7 + p8w8

A result of less than 0.74 is probably a non-coding region.
A result equal or greater than 0.95 is probably a coding region.
Anything in between these two values is uncertain.

Usage

Here is a sample session with tcode


% tcode 
Identify protein-coding regions using Fickett TESTCODE statistic
Input nucleotide sequence(s): tembl:x65921
Length of sliding window [200]: 
Output report [x65921.tcode]: 

Go to the input files for this example
Go to the output files for this example

Example 2

Produce a graphical plot


% tcode -plot -graph cps 
Identify protein-coding regions using Fickett TESTCODE statistic
Input nucleotide sequence(s): tembl:x65921
Length of sliding window [200]: 

Created tcode.ps

Go to the output files for this example

Command line arguments

Identify protein-coding regions using Fickett TESTCODE statistic
Version: EMBOSS:6.4.0.0

   Standard (Mandatory) qualifiers (* if not always prompted):
  [-sequence]          seqall     Nucleotide sequence(s) filename and optional
                                  format, or reference (input USA)
   -window             integer    [200] This is the number of nucleotide bases
                                  over which the TESTCODE statistic will be
                                  performed each time. The window will then
                                  slide along the sequence, covering the same
                                  number of bases each time. (Integer 200 or
                                  more)
*  -outfile            report     [*.tcode] Output report file name (default
                                  -rformat table)
*  -graph              xygraph    [$EMBOSS_GRAPHICS value, or x11] Graph type
                                  (ps, hpgl, hp7470, hp7580, meta, cps, x11,
                                  tek, tekt, none, data, xterm, png, gif, pdf,
                                  svg)

   Additional (Optional) qualifiers: (none)
   Advanced (Unprompted) qualifiers:
   -datafile           datafile   [Etcode.dat] The default data file is
                                  Etcode.dat and contains coding probabilities
                                  for each base. The probabilities are for
                                  both positional and compositional
                                  information.
   -step               integer    [3] The selected window will, by default,
                                  slide along the nucleotide sequence by three
                                  bases at a time, retaining the frame
                                  (although the algorithm is not frame
                                  sensitive). This may be altered to increase
                                  or decrease the increment of the slide.
                                  (Integer 1 or more)
   -plot               toggle     [N] On selection a graph of the sequence (X
                                  axis) plotted against the coding score (Y
                                  axis) will be displayed. Sequence above the
                                  green line is coding, that below the red
                                  line is non-coding.

   Associated qualifiers:

   "-sequence" associated qualifiers
   -sbegin1            integer    Start of each sequence to be used
   -send1              integer    End of each sequence to be used
   -sreverse1          boolean    Reverse (if DNA)
   -sask1              boolean    Ask for begin/end/reverse
   -snucleotide1       boolean    Sequence is nucleotide
   -sprotein1          boolean    Sequence is protein
   -slower1            boolean    Make lower case
   -supper1            boolean    Make upper case
   -sformat1           string     Input sequence format
   -sdbname1           string     Database name
   -sid1               string     Entryname
   -ufo1               string     UFO features
   -fformat1           string     Features format
   -fopenfile1         string     Features file name

   "-outfile" associated qualifiers
   -rformat            string     Report format
   -rname              string     Base file name
   -rextension         string     File name extension
   -rdirectory         string     Output directory
   -raccshow           boolean    Show accession number in the report
   -rdesshow           boolean    Show description in the report
   -rscoreshow         boolean    Show the score in the report
   -rstrandshow        boolean    Show the nucleotide strand in the report
   -rusashow           boolean    Show the full USA in the report
   -rmaxall            integer    Maximum total hits to report
   -rmaxseq            integer    Maximum hits to report for one sequence

   "-graph" associated qualifiers
   -gprompt            boolean    Graph prompting
   -gdesc              string     Graph description
   -gtitle             string     Graph title
   -gsubtitle          string     Graph subtitle
   -gxtitle            string     Graph x axis title
   -gytitle            string     Graph y axis title
   -goutfile           string     Output file for non interactive displays
   -gdirectory         string     Output directory

   General qualifiers:
   -auto               boolean    Turn off prompts
   -stdout             boolean    Write first file to standard output
   -filter             boolean    Read first file from standard input, write
                                  first file to standard output
   -options            boolean    Prompt for standard and additional values
   -debug              boolean    Write debug output to program.dbg
   -verbose            boolean    Report some/full command line options
   -help               boolean    Report command line options and exit. More
                                  information on associated and general
                                  qualifiers can be found with -help -verbose
   -warning            boolean    Report warnings
   -error              boolean    Report errors
   -fatal              boolean    Report fatal errors
   -die                boolean    Report dying program messages
   -version            boolean    Report version number and exit

Qualifier Type Description Allowed values Default
Standard (Mandatory) qualifiers
[-sequence]
(Parameter 1)
seqall Nucleotide sequence(s) filename and optional format, or reference (input USA) Readable sequence(s) Required
-window integer This is the number of nucleotide bases over which the TESTCODE statistic will be performed each time. The window will then slide along the sequence, covering the same number of bases each time. Integer 200 or more 200
-outfile report Output report file name (default -rformat table) <*>.tcode
-graph xygraph Graph type EMBOSS has a list of known devices, including ps, hpgl, hp7470, hp7580, meta, cps, x11, tek, tekt, none, data, xterm, png, gif, pdf, svg EMBOSS_GRAPHICS value, or x11
Additional (Optional) qualifiers
(none)
Advanced (Unprompted) qualifiers
-datafile datafile The default data file is Etcode.dat and contains coding probabilities for each base. The probabilities are for both positional and compositional information. Data file Etcode.dat
-step integer The selected window will, by default, slide along the nucleotide sequence by three bases at a time, retaining the frame (although the algorithm is not frame sensitive). This may be altered to increase or decrease the increment of the slide. Integer 1 or more 3
-plot toggle On selection a graph of the sequence (X axis) plotted against the coding score (Y axis) will be displayed. Sequence above the green line is coding, that below the red line is non-coding. Toggle value Yes/No No
Associated qualifiers
"-sequence" associated seqall qualifiers
-sbegin1
-sbegin_sequence
integer Start of each sequence to be used Any integer value 0
-send1
-send_sequence
integer End of each sequence to be used Any integer value 0
-sreverse1
-sreverse_sequence
boolean Reverse (if DNA) Boolean value Yes/No N
-sask1
-sask_sequence
boolean Ask for begin/end/reverse Boolean value Yes/No N
-snucleotide1
-snucleotide_sequence
boolean Sequence is nucleotide Boolean value Yes/No N
-sprotein1
-sprotein_sequence
boolean Sequence is protein Boolean value Yes/No N
-slower1
-slower_sequence
boolean Make lower case Boolean value Yes/No N
-supper1
-supper_sequence
boolean Make upper case Boolean value Yes/No N
-sformat1
-sformat_sequence
string Input sequence format Any string  
-sdbname1
-sdbname_sequence
string Database name Any string  
-sid1
-sid_sequence
string Entryname Any string  
-ufo1
-ufo_sequence
string UFO features Any string  
-fformat1
-fformat_sequence
string Features format Any string  
-fopenfile1
-fopenfile_sequence
string Features file name Any string  
"-outfile" associated report qualifiers
-rformat string Report format Any string table
-rname string Base file name Any string  
-rextension string File name extension Any string  
-rdirectory string Output directory Any string  
-raccshow boolean Show accession number in the report Boolean value Yes/No N
-rdesshow boolean Show description in the report Boolean value Yes/No N
-rscoreshow boolean Show the score in the report Boolean value Yes/No Y
-rstrandshow boolean Show the nucleotide strand in the report Boolean value Yes/No Y
-rusashow boolean Show the full USA in the report Boolean value Yes/No N
-rmaxall integer Maximum total hits to report Any integer value 0
-rmaxseq integer Maximum hits to report for one sequence Any integer value 0
"-graph" associated xygraph qualifiers
-gprompt boolean Graph prompting Boolean value Yes/No N
-gdesc string Graph description Any string Fickett testcode plot
-gtitle string Graph title Any string  
-gsubtitle string Graph subtitle Any string  
-gxtitle string Graph x axis title Any string  
-gytitle string Graph y axis title Any string  
-goutfile string Output file for non interactive displays Any string  
-gdirectory string Output directory Any string  
General qualifiers
-auto boolean Turn off prompts Boolean value Yes/No N
-stdout boolean Write first file to standard output Boolean value Yes/No N
-filter boolean Read first file from standard input, write first file to standard output Boolean value Yes/No N
-options boolean Prompt for standard and additional values Boolean value Yes/No N
-debug boolean Write debug output to program.dbg Boolean value Yes/No N
-verbose boolean Report some/full command line options Boolean value Yes/No Y
-help boolean Report command line options and exit. More information on associated and general qualifiers can be found with -help -verbose Boolean value Yes/No N
-warning boolean Report warnings Boolean value Yes/No Y
-error boolean Report errors Boolean value Yes/No Y
-fatal boolean Report fatal errors Boolean value Yes/No Y
-die boolean Report dying program messages Boolean value Yes/No Y
-version boolean Report version number and exit Boolean value Yes/No N

Input file format

The input is a standard EMBOSS sequence query (also known as a 'USA').

Major sequence database sources defined as standard in EMBOSS installations include srs:embl, srs:uniprot and ensembl

Data can also be read from sequence output in any supported format written by an EMBOSS or third-party application.

The input format can be specified by using the command-line qualifier -sformat xxx, where 'xxx' is replaced by the name of the required format. The available format names are: gff (gff3), gff2, embl (em), genbank (gb, refseq), ddbj, refseqp, pir (nbrf), swissprot (swiss, sw), dasgff and debug.

See: http://emboss.sf.net/docs/themes/SequenceFormats.html for further information on sequence formats.

The program will ignore ambiguity codes in the nucleic acid sequence and just accept the four common bases. This is a function of the algorithm, and the data tables.

Input files for usage example

'tembl:x65921' is a sequence entry in the example nucleic acid database 'tembl'

Database entry: tembl:x65921

ID   X65921; SV 1; linear; genomic DNA; STD; HUM; 2016 BP.
XX
AC   X65921; S45242;
XX
DT   13-MAY-1992 (Rel. 31, Created)
DT   14-NOV-2006 (Rel. 89, Last updated, Version 7)
XX
DE   H.sapiens fau 1 gene
XX
KW   fau 1 gene.
XX
OS   Homo sapiens (human)
OC   Eukaryota; Metazoa; Chordata; Craniata; Vertebrata; Euteleostomi; Mammalia;
OC   Eutheria; Euarchontoglires; Primates; Haplorrhini; Catarrhini; Hominidae;
OC   Homo.
XX
RN   [1]
RP   1-2016
RA   Kas K.;
RT   ;
RL   Submitted (29-APR-1992) to the EMBL/GenBank/DDBJ databases.
RL   K. Kas, University of Antwerp, Dept of Biochemistry T3.22,
RL   Universiteitsplein 1, 2610 Wilrijk, BELGIUM
XX
RN   [2]
RP   1-2016
RX   DOI; 10.1016/0006-291X(92)91286-Y.
RX   PUBMED; 1326960.
RA   Kas K., Michiels L., Merregaert J.;
RT   "Genomic structure and expression of the human fau gene: encoding the
RT   ribosomal protein S30 fused to a ubiquitin-like protein";
RL   Biochem. Biophys. Res. Commun. 187(2):927-933(1992).
XX
DR   GDB; 191789.
DR   GDB; 191790.
DR   GDB; 354872.
DR   GDB; 4590236.
XX
FH   Key             Location/Qualifiers
FH
FT   source          1..2016
FT                   /organism="Homo sapiens"
FT                   /mol_type="genomic DNA"
FT                   /clone_lib="CML cosmid"
FT                   /clone="15.1"
FT                   /db_xref="taxon:9606"
FT   mRNA            join(408..504,774..856,951..1095,1557..1612,1787..>1912)
FT                   /gene="fau 1"
FT   exon            408..504
FT                   /number=1


  [Part of this file has been deleted for brevity]

FT                   RAKRRMQYNRRFVNVVPTFGKKKGPNANS"
FT   intron          857..950
FT                   /number=2
FT   exon            951..1095
FT                   /number=3
FT   intron          1096..1556
FT                   /number=3
FT   exon            1557..1612
FT                   /number=4
FT   intron          1613..1786
FT                   /number=4
FT   exon            1787..>1912
FT                   /number=5
FT   polyA_signal    1938..1943
XX
SQ   Sequence 2016 BP; 421 A; 562 C; 538 G; 495 T; 0 other;
     ctaccatttt ccctctcgat tctatatgta cactcgggac aagttctcct gatcgaaaac        60
     ggcaaaacta aggccccaag taggaatgcc ttagttttcg gggttaacaa tgattaacac       120
     tgagcctcac acccacgcga tgccctcagc tcctcgctca gcgctctcac caacagccgt       180
     agcccgcagc cccgctggac accggttctc catccccgca gcgtagcccg gaacatggta       240
     gctgccatct ttacctgcta cgccagcctt ctgtgcgcgc aactgtctgg tcccgccccg       300
     tcctgcgcga gctgctgccc aggcaggttc gccggtgcga gcgtaaaggg gcggagctag       360
     gactgccttg ggcggtacaa atagcaggga accgcgcggt cgctcagcag tgacgtgaca       420
     cgcagcccac ggtctgtact gacgcgccct cgcttcttcc tctttctcga ctccatcttc       480
     gcggtagctg ggaccgccgt tcaggtaaga atggggcctt ggctggatcc gaagggcttg       540
     tagcaggttg gctgcggggt cagaaggcgc ggggggaacc gaagaacggg gcctgctccg       600
     tggccctgct ccagtcccta tccgaactcc ttgggaggca ctggccttcc gcacgtgagc       660
     cgccgcgacc accatcccgt cgcgatcgtt tctggaccgc tttccactcc caaatctcct       720
     ttatcccaga gcatttcttg gcttctctta caagccgtct tttctttact cagtcgccaa       780
     tatgcagctc tttgtccgcg cccaggagct acacaccttc gaggtgaccg gccaggaaac       840
     ggtcgcccag atcaaggtaa ggctgcttgg tgcgccctgg gttccatttt cttgtgctct       900
     tcactctcgc ggcccgaggg aacgcttacg agccttatct ttccctgtag gctcatgtag       960
     cctcactgga gggcattgcc ccggaagatc aagtcgtgct cctggcaggc gcgcccctgg      1020
     aggatgaggc cactctgggc cagtgcgggg tggaggccct gactaccctg gaagtagcag      1080
     gccgcatgct tggaggtgag tgagagagga atgttctttg aagtaccggt aagcgtctag      1140
     tgagtgtggg gtgcatagtc ctgacagctg agtgtcacac ctatggtaat agagtacttc      1200
     tcactgtctt cagttcagag tgattcttcc tgtttacatc cctcatgttg aacacagacg      1260
     tccatgggag actgagccag agtgtagttg tatttcagtc acatcacgag atcctagtct      1320
     ggttatcagc ttccacacta aaaattaggt cagaccaggc cccaaagtgc tctataaatt      1380
     agaagctgga agatcctgaa atgaaactta agatttcaag gtcaaatatc tgcaactttg      1440
     ttctcattac ctattgggcg cagcttctct ttaaaggctt gaattgagaa aagaggggtt      1500
     ctgctgggtg gcaccttctt gctcttacct gctggtgcct tcctttccca ctacaggtaa      1560
     agtccatggt tccctggccc gtgctggaaa agtgagaggt cagactccta aggtgagtga      1620
     gagtattagt ggtcatggtg ttaggacttt ttttcctttc acagctaaac caagtccctg      1680
     ggctcttact cggtttgcct tctccctccc tggagatgag cctgagggaa gggatgctag      1740
     gtgtggaaga caggaaccag ggcctgatta accttccctt ctccaggtgg ccaaacagga      1800
     gaagaagaag aagaagacag gtcgggctaa gcggcggatg cagtacaacc ggcgctttgt      1860
     caacgttgtg cccacctttg gcaagaagaa gggccccaat gccaactctt aagtcttttg      1920
     taattctggc tttctctaat aaaaaagcca cttagttcag tcatcgcatt gtttcatctt      1980
     tacttgcaag gcctcaggga gaggtgtgct tctcgg                                2016
//

Output file format

The output is a standard EMBOSS report file.

The results can be output in one of several styles by using the command-line qualifier -rformat xxx, where 'xxx' is replaced by the name of the required format. The available format names are: embl, genbank, gff, pir, swiss, dasgff, debug, listfile, dbmotif, diffseq, draw, restrict, excel, feattable, motif, nametable, regions, seqtable, simple, srs, table, tagseq.

See: http://emboss.sf.net/docs/themes/ReportFormats.html for further information on report formats.

tcode outputs a report format file. The default format is 'table'.

The resulting report file will be given a name relating to the analysed sequence together with the .tcode suffix by default. Should there be no sequence description, the default reverts to outfile.tcode.

tcode optionally outputs a graph to the specified graphics device.

The graphical display is output with the default file name tcode.1. and then the name of the selected graphical display (e.g. png; ps).

The graph indicates the threshold for probably being coding with a green horizontal line and the threshold for probably not being coding with a red horizontal line.

Output files for usage example

File: x65921.tcode

########################################
# Program: tcode
# Rundate: Fri 15 Jul 2011 12:00:00
# Commandline: tcode
#    -sequence tembl:x65921
# Report_format: table
# Report_file: x65921.tcode
########################################

#=======================================
#
# Sequence: X65921     from: 1   to: 2016
# HitCount: 606
#
# Fickett TESTCODE statistic
#
#=======================================

  Start     End  Strand   Score Estimation
      1     200       +   0.692 Non-coding
      4     203       +   0.666 Non-coding
      7     206       +   0.692 Non-coding
     10     209       +   0.797 No opinion
     13     212       +   0.766 No opinion
     16     215       +   0.805 No opinion
     19     218       +   0.824 No opinion
     22     221       +   0.901 No opinion
     25     224       +   0.934 No opinion
     28     227       +   0.977 Coding    
     31     230       +   0.903 No opinion
     34     233       +   0.942 No opinion
     37     236       +   1.043 Coding    
     40     239       +   1.179 Coding    
     43     242       +   1.149 Coding    
     46     245       +   1.031 Coding    
     49     248       +   1.012 Coding    
     52     251       +   1.121 Coding    
     55     254       +   1.004 Coding    
     58     257       +   0.970 Coding    
     61     260       +   0.941 No opinion
     64     263       +   0.941 No opinion
     67     266       +   0.995 Coding    
     70     269       +   1.029 Coding    
     73     272       +   1.072 Coding    
     76     275       +   0.930 No opinion
     79     278       +   1.023 Coding    
     82     281       +   0.959 Coding    
     85     284       +   1.107 Coding    
     88     287       +   0.985 Coding    
     91     290       +   0.880 No opinion


  [Part of this file has been deleted for brevity]

   1696    1895       +   1.099 Coding    
   1699    1898       +   1.027 Coding    
   1702    1901       +   1.067 Coding    
   1705    1904       +   1.067 Coding    
   1708    1907       +   1.067 Coding    
   1711    1910       +   1.086 Coding    
   1714    1913       +   1.024 Coding    
   1717    1916       +   1.016 Coding    
   1720    1919       +   0.933 No opinion
   1723    1922       +   0.964 Coding    
   1726    1925       +   0.887 No opinion
   1729    1928       +   0.973 Coding    
   1732    1931       +   0.991 Coding    
   1735    1934       +   0.928 No opinion
   1738    1937       +   0.862 No opinion
   1741    1940       +   0.848 No opinion
   1744    1943       +   0.848 No opinion
   1747    1946       +   0.797 No opinion
   1750    1949       +   0.844 No opinion
   1753    1952       +   0.873 No opinion
   1756    1955       +   0.883 No opinion
   1759    1958       +   0.959 Coding    
   1762    1961       +   1.002 Coding    
   1765    1964       +   0.977 Coding    
   1768    1967       +   0.955 Coding    
   1771    1970       +   0.955 Coding    
   1774    1973       +   0.959 Coding    
   1777    1976       +   0.969 Coding    
   1780    1979       +   0.969 Coding    
   1783    1982       +   0.969 Coding    
   1786    1985       +   0.911 No opinion
   1789    1988       +   0.948 No opinion
   1792    1991       +   0.865 No opinion
   1795    1994       +   0.948 No opinion
   1798    1997       +   0.948 No opinion
   1801    2000       +   0.948 No opinion
   1804    2003       +   0.901 No opinion
   1807    2006       +   0.879 No opinion
   1810    2009       +   0.840 No opinion
   1813    2012       +   0.785 No opinion
   1816    2015       +   0.785 No opinion

#---------------------------------------
#---------------------------------------

#---------------------------------------
# Total_sequences: 1
# Total_length: 2016
# Reported_sequences: 1
# Reported_hitcount: 606
#---------------------------------------

Output files for usage example 2

Graphics File: tcode.ps

[tcode results]

Data files

EMBOSS data files are distributed with the application and stored in the standard EMBOSS data directory, which is defined by the EMBOSS environment variable EMBOSS_DATA.

To see the available EMBOSS data files, run:

% embossdata -showall

To fetch one of the data files (for example 'Exxx.dat') into your current directory for you to inspect or modify, run:


% embossdata -fetch -file Exxx.dat

Users can provide their own data files in their own directories. Project specific files can be put in the current directory, or for tidier directory listings in a subdirectory called ".embossdata". Files for all EMBOSS runs can be put in the user's home directory, or again in a subdirectory called ".embossdata".

The directories are searched in the following order:

The default data file (look-up table) is Etcode.dat which contains the data from the original paper (1)

# Fickett TESTCODE data
# Nuc. Acids Res. 10(17) 5303-5318
#
# Position parameter values (last value must be 0.0)
1.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
0.0
#
#
# Content parameter values (last value must be 0.0)
0.33
0.31
0.29
0.27
0.25
0.23
0.21
0.17
0.00
#
#
# Position probabilities for A,C,G,T respectively
0.94 0.80 0.90 0.97
0.68 0.70 0.88 0.97
0.84 0.70 0.74 0.91
0.93 0.81 0.64 0.68
0.58 0.66 0.53 0.69
0.68 0.48 0.48 0.44
0.45 0.51 0.27 0.54
0.34 0.33 0.16 0.20
0.20 0.30 0.08 0.09
0.22 0.23 0.08 0.09
#
#
# Content probabilities for A,C,G,T respectively
0.28 0.82 0.40 0.28
0.49 0.64 0.54 0.24
0.44 0.51 0.47 0.39
0.55 0.64 0.64 0.40
0.62 0.59 0.64 0.55
0.49 0.59 0.73 0.75
0.67 0.43 0.41 0.56
0.65 0.44 0.41 0.69
0.81 0.39 0.33 0.51
0.21 0.31 0.29 0.58
#
#
# Weights for position
0.26
0.18
0.31
0.33
#
#
# Weights for content
0.11
0.12
0.15
0.14

This file is retrievable using EMBOSSDATA.

Window size is set by default to 200. The algorithm requires sufficient sequence to perform the statistic on. The original paper suggests a minimum window size of 200.

Window stepping increment is set by default to 3. This will ensure the resulting information remains in frame.

Alternative Data Files

There are no alternative data files currently in the EMBOSS Data directory, but alternative values may be user defined.

Notes

The TESTCODE statistic reflects the fact that codons are used with unequal frequency and that oligonucleotides and nucleotides tend to be repeated with a periodicity of three. The original paper reports that the test had been thoroughly proven on 400,000 bases of sequence data: it misclassifies 5% of the regions tested and gives an answer of "No Opinion" one fifth of the time.

In the GCG package, the current (version 10.3) TESTCODE application's apparent interpretation of the algorithm is: MAX(A1,A2,A3) / MIN(A1,A2,A3) The EMBOSS tcode program uses the correct Fickett algorithm equation: MAX(A1,A2,A3) / MIN(A1,A2,A3) + 1 thus any plot using the GCG TESTCODE aplication will be slightly higher than the tcode equivalent.

References

  1. Fickett, J.W. (1982) Nucleic Acids Research 10(17) pp.5303-5318 "Recognition of protein coding regions in DNA sequences"

Warnings

The program will ignore ambiguity codes in the nucleic acid sequence and just accept the four common bases. This is a function of the algorithm, and the data tables.

Diagnostic Error Messages

Standard error messages are given for incorrect sequence input.

Exit status

It always exits with status 0.

See also

Program name Description
checktrans Reports STOP codons and ORF statistics of a protein
getorf Finds and extracts open reading frames (ORFs)
marscan Finds matrix/scaffold recognition (MRS) signatures in DNA sequences
plotorf Plot potential open reading frames in a nucleotide sequence
showorf Display a nucleotide sequence and translation in pretty format
sixpack Display a DNA sequence with 6-frame translation and ORFs
syco Draw synonymous codon usage statistic plot for a nucleotide sequence
wobble Plot third base position variability in a nucleotide sequence

See Elsewhere

TESTCODE - GCG package, Accelrys Inc. Uses a different interpretation of the same algorithm. Source code unavailable.

SPIN - "Uneven positional base preferences" Staden software. Free to academics, versions for both X and Windows platforms.

Author(s)

Alan Bleasby
European Bioinformatics Institute, Wellcome Trust Genome Campus, Hinxton, Cambridge CB10 1SD, UK

Please report all bugs to the EMBOSS bug team (emboss-bug © emboss.open-bio.org) not to the original author.

History

Date of original completion: 2nd March 2003

Target users

This program is intended to be used by everyone and everything, from naive users to embedded scripts.

Comments

None