DOMAINSSE documentation


 


CONTENTS

1.0 SUMMARY
2.0 INPUTS & OUTPUTS
3.0 INPUT FILE FORMAT
4.0 OUTPUT FILE FORMAT
5.0 DATA FILES
6.0 USAGE
7.0 KNOWN BUGS & WARNINGS
8.0 NOTES
9.0 DESCRIPTION
10.0 ALGORITHM
11.0 RELATED APPLICATIONS
12.0 DIAGNOSTIC ERROR MESSAGES
13.0 AUTHORS
14.0 REFERENCES



1.0 SUMMARY

Add secondary structure records to a DCF file


2.0 INPUTS & OUTPUTS

DOMAINSSE parses a DCF file (domain classification file) and writes a file containing the same data, except that domain secondary structure information derived from structural are added. Domain sequences are taken from domain CCF files (clean coordinate files). The CCF files must contain secondary structure information, which can be added by using PDBPLUS. The path for the CCF files (input) and names of DCF files (input and output) are specified by the user. The extension of CCF files is specified in the ACD file. A log file is also written.


3.0 INPUT FILE FORMAT

The format of the DCF file is described in the SCOPPARSE documentation. An example of the input file is shown in Figure 1.

Input files for usage example

File: ../scopparse-keep/all.scop

ID   D1CS4A_
XX
EN   1CS4
XX
TY   SCOP
XX
SI   53931 CL; 54861 FO; 55073 SF; 55074 FA; 55077 DO; 55078 SO; 39418 DD;
XX
CL   Alpha and beta proteins (a+b)
XX
FO   Ferredoxin-like
XX
SF   Adenylyl and guanylyl cyclase catalytic domain
XX
FA   Adenylyl and guanylyl cyclase catalytic domain
XX
DO   Adenylyl cyclase VC1, domain C1a
XX
OS   Dog (Canis familiaris)
XX
NC   1
XX
CN   [1]
XX
CH   A CHAIN; . START; . END;
//
ID   D1II7A_
XX
EN   1II7
XX
TY   SCOP
XX
SI   53931 CL; 56299 FO; 56300 SF; 64427 FA; 64428 DO; 64429 SO; 62415 DD;
XX
CL   Alpha and beta proteins (a+b)
XX
FO   Metallo-dependent phosphatases
XX
SF   Metallo-dependent phosphatases
XX
FA   DNA double-strand break repair nuclease
XX
DO   Mre11
XX
OS   Archaeon Pyrococcus furiosus
XX
NC   1
XX
CN   [1]
XX
CH   A CHAIN; . START; . END;
//




4.0 OUTPUT FILE FORMAT

The format of the DCF file is described in the SCOPPARSE documentation. DOMAINRESO adds the following records:

Output files for usage example

File: domainsse.out

ID   D1CS4A_
XX
EN   1CS4
XX
TY   SCOP
XX
SI   53931 CL; 54861 FO; 55073 SF; 55074 FA; 55077 DO; 55078 SO; 39418 DD;
XX
CL   Alpha and beta proteins (a+b)
XX
FO   Ferredoxin-like
XX
SF   Adenylyl and guanylyl cyclase catalytic domain
XX
FA   Adenylyl and guanylyl cyclase catalytic domain
XX
DO   Adenylyl cyclase VC1, domain C1a
XX
OS   Dog (Canis familiaris)
XX
SE   HH
XX
SS   SEQUENCE    46 AA;   6039 MW;  32D7FC5C51294C12 CRC64;
     LLLHHHHHHH LLHHHHHHHH HHHHHHHHHH HHHHHLLEEE EEELLL
XX
NC   1
XX
CN   [1]
XX
CH   A CHAIN; . START; . END;
//
ID   D1II7A_
XX
EN   1II7
XX
TY   SCOP
XX
SI   53931 CL; 56299 FO; 56300 SF; 64427 FA; 64428 DO; 64429 SO; 62415 DD;
XX
CL   Alpha and beta proteins (a+b)
XX
FO   Metallo-dependent phosphatases
XX
SF   Metallo-dependent phosphatases
XX
FA   DNA double-strand break repair nuclease
XX
DO   Mre11
XX
OS   Archaeon Pyrococcus furiosus
XX
SE   HEEE
XX
SS   SEQUENCE    43 AA;   5411 MW;  F2A5FA03304F5F35 CRC64;
     LLLLLLHHHH EEEEEEEEEE EEEEEEEEEE EELLLEEEEE LLL
XX
NC   1
XX
CN   [1]
XX
CH   A CHAIN; . START; . END;
//

File: domainsse.log





5.0 DATA FILES

None.


6.0 USAGE

6.1 COMMAND LINE ARGUMENTS

   Standard (Mandatory) qualifiers:
  [-dcfinfile]         infile     This option specifies the name of the DCF
                                  file (domain classification file) (input). A
                                  'domain classification file' contains
                                  classification and other data for domains
                                  from SCOP or CATH, in DCF format
                                  (EMBL-like). The files are generated by
                                  using SCOPPARSE and CATHPARSE. Domain
                                  sequence information can be added to the
                                  file by using DOMAINSEQS.
  [-dccfdir]           directory  [./] This option specifies the location of
                                  the domain CCF file (clean coordinate files)
                                  (input). A 'clean cordinate file' contains
                                  protein coordinate and derived data for a
                                  single PDB file ('protein clean coordinate
                                  file') or a single domain from SCOP or CATH
                                  ('domain clean coordinate file'), in CCF
                                  format (EMBL-like). The files, generated by
                                  using PDBPARSE (PDB files) or DOMAINER
                                  (domains), contain 'cleaned-up' data that is
                                  self-consistent and error-corrected.
                                  Records for residue solvent accessibility
                                  and secondary structure are added to the
                                  file by using PDBPLUS.
  [-dcfoutfile]        outfile    [*.domainsse] This option specifies the name
                                  of the DCF file (domain classification
                                  file) with secondary structure records
                                  (output). A 'domain classification file'
                                  contains classification and other data for
                                  domains from SCOP or CATH, in DCF format
                                  (EMBL-like). The files are generated by
                                  using SCOPPARSE and CATHPARSE. Domain
                                  sequence information can be added to the
                                  file by using DOMAINSEQS.
  [-logfile]           outfile    [domainsse.log] This option specifies the
                                  name of the DOMAINSSE log file.

   Additional (Optional) qualifiers: (none)
   Advanced (Unprompted) qualifiers: (none)
   Associated qualifiers:

   "-dcfoutfile" associated qualifiers
   -odirectory3        string     Output directory

   "-logfile" associated qualifiers
   -odirectory4        string     Output directory

   General qualifiers:
   -auto               boolean    Turn off prompts
   -stdout             boolean    Write first file to standard output
   -filter             boolean    Read first file from standard input, write
                                  first file to standard output
   -options            boolean    Prompt for standard and additional values
   -debug              boolean    Write debug output to program.dbg
   -verbose            boolean    Report some/full command line options
   -help               boolean    Report command line options. More
                                  information on associated and general
                                  qualifiers can be found with -help -verbose
   -warning            boolean    Report warnings
   -error              boolean    Report errors
   -fatal              boolean    Report fatal errors
   -die                boolean    Report dying program messages

Standard (Mandatory) qualifiers Allowed values Default
[-dcfinfile]
(Parameter 1)
This option specifies the name of the DCF file (domain classification file) (input). A 'domain classification file' contains classification and other data for domains from SCOP or CATH, in DCF format (EMBL-like). The files are generated by using SCOPPARSE and CATHPARSE. Domain sequence information can be added to the file by using DOMAINSEQS. Input file Required
[-dccfdir]
(Parameter 2)
This option specifies the location of the domain CCF file (clean coordinate files) (input). A 'clean cordinate file' contains protein coordinate and derived data for a single PDB file ('protein clean coordinate file') or a single domain from SCOP or CATH ('domain clean coordinate file'), in CCF format (EMBL-like). The files, generated by using PDBPARSE (PDB files) or DOMAINER (domains), contain 'cleaned-up' data that is self-consistent and error-corrected. Records for residue solvent accessibility and secondary structure are added to the file by using PDBPLUS. Directory ./
[-dcfoutfile]
(Parameter 3)
This option specifies the name of the DCF file (domain classification file) with secondary structure records (output). A 'domain classification file' contains classification and other data for domains from SCOP or CATH, in DCF format (EMBL-like). The files are generated by using SCOPPARSE and CATHPARSE. Domain sequence information can be added to the file by using DOMAINSEQS. Output file <*>.domainsse
[-logfile]
(Parameter 4)
This option specifies the name of the DOMAINSSE log file. Output file domainsse.log
Additional (Optional) qualifiers Allowed values Default
(none)
Advanced (Unprompted) qualifiers Allowed values Default
(none)

6.2 EXAMPLE SESSION

An example of interactive use of DOMAINSSE is shown below. Here is a sample session with domainsse


% domainsse 
Add secondary structure records to a DCF file.
Domain classification file: ../scopparse-keep/all.scop
Clean domain coordinates directory [./]: ../domainer-keep
Domain classification output file [all.domainsse]: domainsse.out
Domainatrix log output file [domainsse.log]: domainsse.log

Processing D1CS4A_
Processing D1II7A_

Done!
 output file name: domainsse.out
 log file name: domainsse.log

Go to the input files for this example
Go to the output files for this example






7.0 KNOWN BUGS & WARNINGS

None.


8.0 NOTES

FILE TYPE FORMAT DESCRIPTION CREATED BY SEE ALSO
Domain classification file (for SCOP) DCF format (EMBL-like format for domain classification data). Classification and other data for domains from SCOP. SCOPPARSE Domain sequence information can be added to the file by using DOMAINSEQS.
Domain classification file (for CATH) DCF format (EMBL-like format for domain classification data). Classification and other data for domains from CATH. CATHPARSE Domain sequence information can be added to the file by using DOMAINSEQS.
Clean coordinate file (for protein) CCF format (EMBL-like format for protein coordinate and derived data). Coordinate and other data for a single PDB file. The data are 'cleaned-up': self-consistent and error-corrected. PDBPARSE Records for residue solvent accessibility and secondary structure are added to the file by using PDBPLUS.
Clean coordinate file (for domain) CCF format (EMBL-like format for protein coordinate and derived data). Coordinate and other data for a single domain from SCOP or CATH. The data are 'cleaned-up': self-consistent and error-corrected. DOMAINER Records for residue solvent accessibility and secondary structure are added to the file by using PDBPLUS.
None


9.0 DESCRIPTION

Domain secondary structure information is not given in the raw SCOP or CATH parsable files, but is required for many analyses and for convenience should, ideally, be provided along with the classification itself. DOMAINSSE reads a DCF file (domain classificaiton file) that lacks secondary structure information and writes one containing such information.


10.0 ALGORITHM

None.


11.0 RELATED APPLICATIONS

See also

Program name Description
aaindexextract Extract amino acid property data from AAINDEX
allversusall Sequence similarity data from all-versus-all comparison
cathparse Generates DCF file from raw CATH files
cutgextract Extract codon usage tables from from CUTG database
domainer Generates domain CCF files from protein CCF files
domainnr Removes redundant domains from a DCF file
domainseqs Adds sequence records to a DCF file
hetparse Converts heterogen group dictionary to EMBL-like format
jaspextract Extract data from JASPAR
pdbparse Parses PDB files and writes protein CCF files
pdbplus Add accessibility & secondary structure to a CCF file
pdbtosp Convert swissprot:PDB codes file to EMBL-like format
printsextract Extract data from PRINTS database for use by pscan
prosextract Processes the PROSITE motif database for use by patmatmotifs
rebaseextract Process the REBASE database for use by restriction enzyme applications
scopparse Generate DCF file from raw SCOP files
seqnr Removes redundancy from DHF files
sites Generate residue-ligand CON files from CCF files
ssematch Search a DCF file for secondary structure matches
tfextract Process TRANSFAC transcription factor database for use by tfscan



12.0 DIAGNOSTIC ERROR MESSAGES

None.


13.0 AUTHORS



Jon Ison (jison@ebi.ac.uk)
The European Bioinformatics Institute Wellcome Trust Genome Campus Cambridge CB10 1SD UK


14.0 REFERENCES

Please cite the authors and EMBOSS. Please cite the authors and EMBOSS.

Rice P, Longden I and Bleasby A (2000) "EMBOSS - The European Molecular Biology Open Software Suite" Trends in Genetics, 15:276-278.

See also http://emboss.sourceforge.net/

14.1 Other useful references