ftreedistpair

 

Wiki

The master copies of EMBOSS documentation are available at http://emboss.open-bio.org/wiki/Appdocs on the EMBOSS Wiki.

Please help by correcting and extending the Wiki pages.

Function

Calculate distance between two sets of trees

Description

Computes the Branch Score distance between trees, which allows for differences in tree topology and which also makes use of branch lengths. Also computes the Robinson-Foulds symmetric difference distance between trees, which allows for differences in tree topology but does not use branch lengths.

Algorithm

This program computes distances between trees. Two distances are computed, the Branch Score Distance of Kuhner and Felsenstein (1994), and the more widely known Symmetric Difference of Robinson and Foulds (1981). The Branch Score Distance uses branch lengths, and can only be calculated when the trees have lengths on all branches. The Symmetric Difference does not use branch length information, only the tree topologies. It must also be borne in mind that neither distance has any immediate statistical interpretation -- we cannot say whether a larger distance is significantly larger than a smaller one.

These distances are computed by considering all possible branches that could exist on the the two trees. Each branch divides the set of species into two groups -- the ones connected to one end of the branch and the ones connected to the other. This makes a partition of the full set of species. (in Newick notation)

  ((A,C),(D,(B,E))) 

has two internal branches. One induces the partition {A, C | B, D, E} and the other induces the partition {A, C, D | B, E}. A different tree with the same set of species,

  (((A,D),C),(B,E)) 

has internal branches that correspond to the two partitions {A, C, D | B, E} and {A, D | B, C, E}. Note that the other branches, all of which are external branches, induce partitions that separate one species from all the others. Thus there are 5 partitions like this: {C | A, B, D, E} on each of these trees. These are always present on all trees, provided that each tree has each species at the end of its own branch.

In the case of the Branch Score distance, each partition that does exist on a tree also has a branch length associated with it. Thus if the tree is

  (((A:0.1,D:0.25):0.05,C:0.01):0.2,(B:0.3,E:0.8):0.2) 

The list of partitions and their branch lengths is:

{A  |  B, C, D, E}     0.1 
{D  |  A, B, C, E}     0.25 
{A, D  |  B, C, E}     0.05 
{C  |  A, B, D, E}     0.01 
{A, D, C  |  B, E}     0.4 
{B  |  A, C, D, E}     0.3 
{E  |  A, B, C, D}     0.8 

Note that the tree is being treated as unrooted here, so that the branch lengths on either side of the rootmost node are summed up to get a branch length of 0.4.

The Branch Score Distance imagines us as having made a list of all possible partitions, the ones shown above and also all 7 other possible partitions, which correspond to branches that are not found in this tree. These are assigned branch lengths of 0. For two trees, we imagine constructing these lists, and then summing the squared differences between the branch lengths. Thus if both trees have branches {A, D | B, C, E}, the sum contains the square of the difference between the branch lengths. If one tree has the branch and the other doesn't, it contains the square of the difference between the branch length and zero (in other words, the square of that branch length). If both trees do not have a particular branch, nothing is added to the sum because the difference is then between 0 and 0.

The Branch Score Distance takes this sum of squared differences and computes its square root. Note that it has some desirable properties. When small branches differ in tree topology, it is not very big. When branches are both present but differ in length, it is affected.

The Symmetric Difference is simply a count of how many partitions there are, among the two trees, that are on one tree and not on the other. In the example above there are two partitions, {A, C | B, D, E} and {A, D | B, C, E}, each of which is present on only one of the two trees. The Symmetric Difference between the two trees is therefore 2. When the two trees are fully resolved bifurcating trees, their symmetric distance must be an even number; it can range from 0 to twice the number of internal branches, which for n species is 4n-6.

Note the relationship between the two distances. If all trees have all their branches have length 1.0, the Branch Score Distance is the square of the Symmetric Difference, as each branch that is present in one but not in the other results in 1.0 being added to the sum of squared differences.

We have assumed that nothing is lost if the trees are treated as unrooted trees. It is easy to define a counterpart to the Branch Score Distance and one to the Symmetric Difference for these rooted trees. Each branch then defines a set of species, namely the clade defined by that branch. Thus if the first of the two trees above were considered as a rooted tree it would define the three clades {A, C}, {B, D, E}, and {B, E}. The Branch Score Distance is computed from the branch lengths for all possible sets of species, with 0 put for each set that does not occur on that tree. The table above will be nearly the same, but with two entries instead of one for the sets on either side of the root, {A C D} and {B E}. The Symmetric Difference between two rooted trees is simply the count of the number of clades that are defined by one but not by the other. For the second tree the clades would be {A, D}, {B, C, E}, and {B, E}. The Symmetric Difference between thee two rooted trees would then be 4.

Although the examples we have discussed have involved fully bifurcating trees, the input trees can have multifurcations. This does not cause any complication for the Branch Score Distance. For the Symmetric Difference, it can lead to distances that are odd numbers.

However, note one strong restriction. The trees should all have the same list of species. If you use one set of species in the first two trees, and another in the second two, and choose distances for adjacent pairs, the distances will be incorrect and will depend on the order of these pairs in the input tree file, in odd ways.

Usage

Here is a sample session with ftreedistpair


% ftreedistpair -style s 
Calculate distance between two sets of trees
Phylip tree file: treedist.dat
Second phylip tree file: treedist.dat
Phylip treedist program output file [treedist.ftreedistpair]: 

Done.


Go to the input files for this example
Go to the output files for this example

Command line arguments

Calculate distance between two sets of trees
Version: EMBOSS:6.5.0.0

   Standard (Mandatory) qualifiers:
  [-intreefile]        tree       Phylip tree file
  [-bintreefile]       tree       Second phylip tree file
  [-outfile]           outfile    [*.ftreedistpair] Phylip treedist program
                                  output file

   Additional (Optional) qualifiers:
   -dtype              menu       [b] Distance type (Values: s (Symmetric
                                  difference); b (Branch score distance))
   -pairing            menu       [l] Tree pairing method (Values: c
                                  (Distances between corresponding pairs each
                                  tree file); l (Distances between all
                                  possible pairs in each tree file))
   -style              menu       [v] Distances output option (Values: f
                                  (Full_matrix); v (Verbose, one pair per
                                  line); s (Sparse, one pair per line))
   -noroot             boolean    [N] Trees to be treated as rooted
   -outgrno            integer    [0] Species number to use as outgroup
                                  (Integer 0 or more)
   -progress           boolean    [N] Print indications of progress of run

   Advanced (Unprompted) qualifiers: (none)
   Associated qualifiers:

   "-outfile" associated qualifiers
   -odirectory3        string     Output directory

   General qualifiers:
   -auto               boolean    Turn off prompts
   -stdout             boolean    Write first file to standard output
   -filter             boolean    Read first file from standard input, write
                                  first file to standard output
   -options            boolean    Prompt for standard and additional values
   -debug              boolean    Write debug output to program.dbg
   -verbose            boolean    Report some/full command line options
   -help               boolean    Report command line options and exit. More
                                  information on associated and general
                                  qualifiers can be found with -help -verbose
   -warning            boolean    Report warnings
   -error              boolean    Report errors
   -fatal              boolean    Report fatal errors
   -die                boolean    Report dying program messages
   -version            boolean    Report version number and exit

Qualifier Type Description Allowed values Default
Standard (Mandatory) qualifiers
[-intreefile]
(Parameter 1)
tree Phylip tree file Phylogenetic tree  
[-bintreefile]
(Parameter 2)
tree Second phylip tree file Phylogenetic tree  
[-outfile]
(Parameter 3)
outfile Phylip treedist program output file Output file <*>.ftreedistpair
Additional (Optional) qualifiers
-dtype list Distance type
s (Symmetric difference)
b (Branch score distance)
b
-pairing list Tree pairing method
c (Distances between corresponding pairs each tree file)
l (Distances between all possible pairs in each tree file)
l
-style list Distances output option
f (Full_matrix)
v (Verbose, one pair per line)
s (Sparse, one pair per line)
v
-noroot boolean Trees to be treated as rooted Boolean value Yes/No No
-outgrno integer Species number to use as outgroup Integer 0 or more 0
-progress boolean Print indications of progress of run Boolean value Yes/No No
Advanced (Unprompted) qualifiers
(none)
Associated qualifiers
"-outfile" associated outfile qualifiers
-odirectory3
-odirectory_outfile
string Output directory Any string  
General qualifiers
-auto boolean Turn off prompts Boolean value Yes/No N
-stdout boolean Write first file to standard output Boolean value Yes/No N
-filter boolean Read first file from standard input, write first file to standard output Boolean value Yes/No N
-options boolean Prompt for standard and additional values Boolean value Yes/No N
-debug boolean Write debug output to program.dbg Boolean value Yes/No N
-verbose boolean Report some/full command line options Boolean value Yes/No Y
-help boolean Report command line options and exit. More information on associated and general qualifiers can be found with -help -verbose Boolean value Yes/No N
-warning boolean Report warnings Boolean value Yes/No Y
-error boolean Report errors Boolean value Yes/No Y
-fatal boolean Report fatal errors Boolean value Yes/No Y
-die boolean Report dying program messages Boolean value Yes/No Y
-version boolean Report version number and exit Boolean value Yes/No N

Input file format

ftreedistpair reads two input tree files. The tree files may either have the number of trees on their first line, or not. If the number of trees is given, it is actually ignored and all trees in the tree file are considered, even if there are more trees than indicated by the number. There is no maximum number of trees that can be processed but, if you feed in too many, there may be an error message about running out of memory. The problem is particularly acute if you choose the option to examine all possible pairs of trees one from each of two input tree files. Thus if there are 1,000 trees in the input tree file, keep in mind that all possible pairs means 1,000,000 pairs to be examined!

Input files for usage example

File: treedist.dat

(A:0.1,(B:0.1,(H:0.1,(D:0.1,(J:0.1,(((G:0.1,E:0.1):0.1,(F:0.1,I:0.1):0.1):0.1,
C:0.1):0.1):0.1):0.1):0.1):0.1);
(A:0.1,(B:0.1,(D:0.1,((J:0.1,H:0.1):0.1,(((G:0.1,E:0.1):0.1,
(F:0.1,I:0.1):0.1):0.1,C:0.1):0.1):0.1):0.1):0.1);
(A:0.1,(B:0.1,(D:0.1,(H:0.1,(J:0.1,(((G:0.1,E:0.1):0.1,(F:0.1,I:0.1):0.1):0.1,
C:0.1):0.1):0.1):0.1):0.1):0.1);
(A:0.1,(B:0.1,(E:0.1,(G:0.1,((F:0.1,I:0.1):0.1,((J:0.1,(H:0.1,D:0.1):0.1):0.1,
C:0.1):0.1):0.1):0.1):0.1):0.1);
(A:0.1,(B:0.1,(E:0.1,(G:0.1,((F:0.1,I:0.1):0.1,(((J:0.1,H:0.1):0.1,D:0.1):0.1,
C:0.1):0.1):0.1):0.1):0.1):0.1);
(A:0.1,(B:0.1,(E:0.1,((F:0.1,I:0.1):0.1,(G:0.1,((J:0.1,(H:0.1,D:0.1):0.1):0.1,
C:0.1):0.1):0.1):0.1):0.1):0.1);
(A:0.1,(B:0.1,(E:0.1,((F:0.1,I:0.1):0.1,(G:0.1,(((J:0.1,H:0.1):0.1,D:0.1):0.1,
C:0.1):0.1):0.1):0.1):0.1):0.1);
(A:0.1,(B:0.1,(E:0.1,((G:0.1,(F:0.1,I:0.1):0.1):0.1,((J:0.1,(H:0.1,
D:0.1):0.1):0.1,C:0.1):0.1):0.1):0.1):0.1);
(A:0.1,(B:0.1,(E:0.1,((G:0.1,(F:0.1,I:0.1):0.1):0.1,(((J:0.1,H:0.1):0.1,
D:0.1):0.1,C:0.1):0.1):0.1):0.1):0.1);
(A:0.1,(B:0.1,(E:0.1,(G:0.1,((F:0.1,I:0.1):0.1,((J:0.1,(H:0.1,D:0.1):0.1):0.1,
C:0.1):0.1):0.1):0.1):0.1):0.1);
(A:0.1,(B:0.1,(D:0.1,(H:0.1,(J:0.1,(((G:0.1,E:0.1):0.1,(F:0.1,I:0.1):0.1):0.1,
C:0.1):0.1):0.1):0.1):0.1):0.1);
(A:0.1,(B:0.1,(E:0.1,((G:0.1,(F:0.1,I:0.1):0.1):0.1,((J:0.1,(H:0.1,
D:0.1):0.1):0.1,C:0.1):0.1):0.1):0.1):0.1);

Output file format

If any of the four types of analysis are selected, the user must specify how they want the results presented.

The Full matrix (choice F) is a table showing all distances. It is written onto the output file. The table is presented as groups of 10 columns. Here is the Full matrix for the 12 trees in the input tree file which is given as an example at the end of this page.

Tree distance program, version 3.6

Symmetric differences between all pairs of trees in tree file:



          1     2     3     4     5     6     7     8     9    10 
      \------------------------------------------------------------
    1 |   0     4     2    10    10    10    10    10    10    10  
    2 |   4     0     2    10     8    10     8    10     8    10  
    3 |   2     2     0    10    10    10    10    10    10    10  
    4 |  10    10    10     0     2     2     4     2     4     0  
    5 |  10     8    10     2     0     4     2     4     2     2  
    6 |  10    10    10     2     4     0     2     2     4     2  
    7 |  10     8    10     4     2     2     0     4     2     4  
    8 |  10    10    10     2     4     2     4     0     2     2  
    9 |  10     8    10     4     2     4     2     2     0     4  
   10 |  10    10    10     0     2     2     4     2     4     0  
   11 |   2     2     0    10    10    10    10    10    10    10  
   12 |  10    10    10     2     4     2     4     0     2     2  

         11    12 
      \------------
    1 |   2    10  
    2 |   2    10  
    3 |   0    10  
    4 |  10     2  
    5 |  10     4  
    6 |  10     2  
    7 |  10     4  
    8 |  10     0  
    9 |  10     2  
   10 |  10     2  
   11 |   0    10  
   12 |  10     0  

The Full matrix is only available for analyses P and L (not for A or C).

Option V (Verbose) writes one distance per line. The Verbose output is the default. Here it is for the example data set given below:

Tree distance program, version 3.6

Symmetric differences between adjacent pairs of trees:

Trees 1 and 2:    4
Trees 3 and 4:    10
Trees 5 and 6:    4
Trees 7 and 8:    4
Trees 9 and 10:    4
Trees 11 and 12:    10

Option S (Sparse or terse) is similar except that all that is given on each line are the numbers of the two trees and the distance, separated by blanks. This may be a convenient format if you want to write a program to read these numbers in, and you want to spare yourself the effort of having the program wade through the words on each line in the Verbose output. The first four lines of the Sparse output are titles that your program would want to skip past. Here is the Sparse output for the example trees.

1 2 4
3 4 10
5 6 4
7 8 4
9 10 4
11 12 10

Output files for usage example

File: treedist.ftreedistpair

1 13 0.000000e+00
1 14 2.000000e-01
1 15 1.414214e-01
1 16 3.162278e-01
1 17 3.162278e-01
1 18 3.162278e-01
1 19 3.162278e-01
1 20 3.162278e-01
1 21 3.162278e-01
1 22 3.162278e-01
1 23 1.414214e-01
1 24 3.162278e-01
2 13 2.000000e-01
2 14 0.000000e+00
2 15 1.414214e-01
2 16 3.162278e-01
2 17 2.828427e-01
2 18 3.162278e-01
2 19 2.828427e-01
2 20 3.162278e-01
2 21 2.828427e-01
2 22 3.162278e-01
2 23 1.414214e-01
2 24 3.162278e-01
3 13 1.414214e-01
3 14 1.414214e-01
3 15 0.000000e+00
3 16 3.162278e-01
3 17 3.162278e-01
3 18 3.162278e-01
3 19 3.162278e-01
3 20 3.162278e-01
3 21 3.162278e-01
3 22 3.162278e-01
3 23 0.000000e+00
3 24 3.162278e-01
4 13 3.162278e-01
4 14 3.162278e-01
4 15 3.162278e-01
4 16 0.000000e+00
4 17 1.414214e-01
4 18 1.414214e-01
4 19 2.000000e-01
4 20 1.414214e-01
4 21 2.000000e-01
4 22 0.000000e+00
4 23 3.162278e-01
4 24 1.414214e-01
5 13 3.162278e-01
5 14 2.828427e-01


  [Part of this file has been deleted for brevity]

20 10 1.414214e-01
20 11 3.162278e-01
20 12 0.000000e+00
21 1 3.162278e-01
21 2 2.828427e-01
21 3 3.162278e-01
21 4 2.000000e-01
21 5 1.414214e-01
21 6 2.000000e-01
21 7 1.414214e-01
21 8 1.414214e-01
21 9 0.000000e+00
21 10 2.000000e-01
21 11 3.162278e-01
21 12 1.414214e-01
22 1 3.162278e-01
22 2 3.162278e-01
22 3 3.162278e-01
22 4 0.000000e+00
22 5 1.414214e-01
22 6 1.414214e-01
22 7 2.000000e-01
22 8 1.414214e-01
22 9 2.000000e-01
22 10 0.000000e+00
22 11 3.162278e-01
22 12 1.414214e-01
23 1 1.414214e-01
23 2 1.414214e-01
23 3 0.000000e+00
23 4 3.162278e-01
23 5 3.162278e-01
23 6 3.162278e-01
23 7 3.162278e-01
23 8 3.162278e-01
23 9 3.162278e-01
23 10 3.162278e-01
23 11 0.000000e+00
23 12 3.162278e-01
24 1 3.162278e-01
24 2 3.162278e-01
24 3 3.162278e-01
24 4 1.414214e-01
24 5 2.000000e-01
24 6 1.414214e-01
24 7 2.000000e-01
24 8 0.000000e+00
24 9 1.414214e-01
24 10 1.414214e-01
24 11 3.162278e-01
24 12 0.000000e+00

Data files

None

Notes

None.

References

None.

Warnings

None.

Diagnostic Error Messages

None.

Exit status

It always exits with status 0.

Known bugs

None.

See also

Program name Description
econsense Majority-rule and strict consensus tree
fconsense Majority-rule and strict consensus tree
ftreedist Calculate distances between trees

Author(s)

This program is an EMBOSS conversion of a program written by Joe Felsenstein as part of his PHYLIP package.

Please report all bugs to the EMBOSS bug team (emboss-bug © emboss.open-bio.org) not to the original author.

History

Written (2004) - Joe Felsenstein, University of Washington.

Converted (August 2004) to an EMBASSY program by the EMBOSS team.

Target users

This program is intended to be used by everyone and everything, from naive users to embedded scripts.

Comments

None