fdnamove

 

Wiki

The master copies of EMBOSS documentation are available at http://emboss.open-bio.org/wiki/Appdocs on the EMBOSS Wiki.

Please help by correcting and extending the Wiki pages.

Function

Interactive DNA parsimony

Description

Interactive construction of phylogenies from nucleic acid sequences, with their evaluation by parsimony and compatibility and the display of reconstructed ancestral bases. This can be used to find parsimony or compatibility estimates by hand.

Algorithm

DNAMOVE is an interactive DNA parsimony program, inspired by Wayne Maddison and David and Wayne Maddison's marvellous program MacClade, which is written for Macintosh computers. DNAMOVE reads in a data set which is prepared in almost the same format as one for the DNA parsimony program DNAPARS. It allows the user to choose an initial tree, and displays this tree on the screen. The user can look at different sites and the way the nucleotide states are distributed on that tree, given the most parsimonious reconstruction of state changes for that particular tree. The user then can specify how the tree is to be rearraranged, rerooted or written out to a file. By looking at different rearrangements of the tree the user can manually search for the most parsimonious tree, and can get a feel for how different sites are affected by changes in the tree topology.

This program uses graphic characters that show the tree to best advantage on some computer systems. Its graphic characters will work best on MSDOS systems or MSDOS windows in Windows, and to any system whose screen or terminals emulate ANSI standard terminals such as old Digital VT100 terminals, Telnet programs, or VT100-compatible windows in the X windowing system. For any other screen types, (such as Macintosh windows) there is a generic option which does not make use of screen graphics characters. The program will work well in those cases, but the tree it displays will look a bit uglier.

This program carries out unrooted parsimony (analogous to Wagner trees) (Eck and Dayhoff, 1966; Kluge and Farris, 1969) on DNA sequences. The method of Fitch (1971) is used to count the number of changes of base needed on a given tree.

The assumptions of this method are exactly analogous to those of MIX:

  1. Each site evolves independently.
  2. Different lineages evolve independently.
  3. The probability of a base substitution at a given site is small over the lengths of time involved in a branch of the phylogeny.
  4. The expected amounts of change in different branches of the phylogeny do not vary by so much that two changes in a high-rate branch are more probable than one change in a low-rate branch.
  5. The expected amounts of change do not vary enough among sites that two changes in one site are more probable than one change in another.

That these are the assumptions of parsimony methods has been documented in a series of papers of mine: (1973a, 1978b, 1979, 1981b, 1983b, 1988b). For an opposing view arguing that the parsimony methods make no substantive assumptions such as these, see the papers by Farris (1983) and Sober (1983a, 1983b), but also read the exchange between Felsenstein and Sober (1986).

Change from an occupied site to a deletion is counted as one change. Reversion from a deletion to an occupied site is allowed and is also counted as one change.

Usage

Here is a sample session with fdnamove


% fdnamove 
Interactive DNA parsimony
Input (aligned) nucleotide sequence set(s): dnamove.dat
Phylip tree file (optional): 
NEXT (R # + - S . T U W O F H J K L C ? X Q) (? for Help): Q
Do you want to write out the tree to a file? (Y or N): Y

 5 species,  13  sites

Computing steps needed for compatibility in sites ...


  (unrooted)                          19.0 Steps            11 sites compatible
                            
  ,-----------5:Epsilon   
--9  
  !  ,--------4:Delta     
  `--8  
     !  ,-----3:Gamma     
     `--7  
        !  ,--2:Beta      
        `--6  
           `--1:Alpha     


Tree written to file "dnamove.treefile"


Go to the input files for this example
Go to the output files for this example

Command line arguments

Interactive DNA parsimony
Version: EMBOSS:6.6.0.0

   Standard (Mandatory) qualifiers:
  [-sequence]          seqsetall  (Aligned) nucleotide sequence set(s)
                                  filename and optional format, or reference
                                  (input USA)
  [-intreefile]        tree       Phylip tree file (optional)

   Additional (Optional) qualifiers (* if not always prompted):
   -weights            properties Weights file - ignore sites with weight zero
   -outgrno            integer    [0] Species number to use as outgroup
                                  (Integer 0 or more)
   -dothreshold        toggle     [N] Use threshold parsimony
*  -threshold          float      [1] Threshold value (Number 1.000 or more)
   -initialtree        menu       [Arbitary] Initial tree (Values: a
                                  (Arbitary); u (User); s (Specify))
   -screenwidth        integer    [80] Width of terminal screen in characters
                                  (Any integer value)
   -screenlines        integer    [24] Number of lines on screen (Any integer
                                  value)
   -outtreefile        outfile    [*.fdnamove] Phylip tree output file
                                  (optional)

   Advanced (Unprompted) qualifiers: (none)
   Associated qualifiers:

   "-sequence" associated qualifiers
   -sbegin1            integer    Start of each sequence to be used
   -send1              integer    End of each sequence to be used
   -sreverse1          boolean    Reverse (if DNA)
   -sask1              boolean    Ask for begin/end/reverse
   -snucleotide1       boolean    Sequence is nucleotide
   -sprotein1          boolean    Sequence is protein
   -slower1            boolean    Make lower case
   -supper1            boolean    Make upper case
   -scircular1         boolean    Sequence is circular
   -squick1            boolean    Read id and sequence only
   -sformat1           string     Input sequence format
   -iquery1            string     Input query fields or ID list
   -ioffset1           integer    Input start position offset
   -sdbname1           string     Database name
   -sid1               string     Entryname
   -ufo1               string     UFO features
   -fformat1           string     Features format
   -fopenfile1         string     Features file name

   "-outtreefile" associated qualifiers
   -odirectory         string     Output directory

   General qualifiers:
   -auto               boolean    Turn off prompts
   -stdout             boolean    Write first file to standard output
   -filter             boolean    Read first file from standard input, write
                                  first file to standard output
   -options            boolean    Prompt for standard and additional values
   -debug              boolean    Write debug output to program.dbg
   -verbose            boolean    Report some/full command line options
   -help               boolean    Report command line options and exit. More
                                  information on associated and general
                                  qualifiers can be found with -help -verbose
   -warning            boolean    Report warnings
   -error              boolean    Report errors
   -fatal              boolean    Report fatal errors
   -die                boolean    Report dying program messages
   -version            boolean    Report version number and exit

Qualifier Type Description Allowed values Default
Standard (Mandatory) qualifiers
[-sequence]
(Parameter 1)
seqsetall (Aligned) nucleotide sequence set(s) filename and optional format, or reference (input USA) Readable sets of sequences Required
[-intreefile]
(Parameter 2)
tree Phylip tree file (optional) Phylogenetic tree  
Additional (Optional) qualifiers
-weights properties Weights file - ignore sites with weight zero Property value(s)  
-outgrno integer Species number to use as outgroup Integer 0 or more 0
-dothreshold toggle Use threshold parsimony Toggle value Yes/No No
-threshold float Threshold value Number 1.000 or more 1
-initialtree list Initial tree
a (Arbitary)
u (User)
s (Specify)
Arbitary
-screenwidth integer Width of terminal screen in characters Any integer value 80
-screenlines integer Number of lines on screen Any integer value 24
-outtreefile outfile Phylip tree output file (optional) Output file <*>.fdnamove
Advanced (Unprompted) qualifiers
(none)
Associated qualifiers
"-sequence" associated seqsetall qualifiers
-sbegin1
-sbegin_sequence
integer Start of each sequence to be used Any integer value 0
-send1
-send_sequence
integer End of each sequence to be used Any integer value 0
-sreverse1
-sreverse_sequence
boolean Reverse (if DNA) Boolean value Yes/No N
-sask1
-sask_sequence
boolean Ask for begin/end/reverse Boolean value Yes/No N
-snucleotide1
-snucleotide_sequence
boolean Sequence is nucleotide Boolean value Yes/No N
-sprotein1
-sprotein_sequence
boolean Sequence is protein Boolean value Yes/No N
-slower1
-slower_sequence
boolean Make lower case Boolean value Yes/No N
-supper1
-supper_sequence
boolean Make upper case Boolean value Yes/No N
-scircular1
-scircular_sequence
boolean Sequence is circular Boolean value Yes/No N
-squick1
-squick_sequence
boolean Read id and sequence only Boolean value Yes/No N
-sformat1
-sformat_sequence
string Input sequence format Any string  
-iquery1
-iquery_sequence
string Input query fields or ID list Any string  
-ioffset1
-ioffset_sequence
integer Input start position offset Any integer value 0
-sdbname1
-sdbname_sequence
string Database name Any string  
-sid1
-sid_sequence
string Entryname Any string  
-ufo1
-ufo_sequence
string UFO features Any string  
-fformat1
-fformat_sequence
string Features format Any string  
-fopenfile1
-fopenfile_sequence
string Features file name Any string  
"-outtreefile" associated outfile qualifiers
-odirectory string Output directory Any string  
General qualifiers
-auto boolean Turn off prompts Boolean value Yes/No N
-stdout boolean Write first file to standard output Boolean value Yes/No N
-filter boolean Read first file from standard input, write first file to standard output Boolean value Yes/No N
-options boolean Prompt for standard and additional values Boolean value Yes/No N
-debug boolean Write debug output to program.dbg Boolean value Yes/No N
-verbose boolean Report some/full command line options Boolean value Yes/No Y
-help boolean Report command line options and exit. More information on associated and general qualifiers can be found with -help -verbose Boolean value Yes/No N
-warning boolean Report warnings Boolean value Yes/No Y
-error boolean Report errors Boolean value Yes/No Y
-fatal boolean Report fatal errors Boolean value Yes/No Y
-die boolean Report dying program messages Boolean value Yes/No Y
-version boolean Report version number and exit Boolean value Yes/No N

Input file format

fdnamove reads any normal sequence USAs.

Input files for usage example

File: dnamove.dat

   5   13
Alpha     AACGUGGCCA AAU
Beta      AAGGUCGCCA AAC
Gamma     CAUUUCGUCA CAA
Delta     GGUAUUUCGG CCU
Epsilon   GGGAUCUCGG CCC

Output file format

fdnamove outputs a graph to the specified graphics device. outputs a report format file. The default format is ...

Output files for usage example

File: dnamove.treefile

(Epsilon,(Delta,(Gamma,(Beta,Alpha))));

Data files

None

Notes

None.

References

None.

Warnings

None.

Diagnostic Error Messages

None.

Exit status

It always exits with status 0.

Known bugs

None.

See also

Program name Description
distmat Create a distance matrix from a multiple sequence alignment
ednacomp DNA compatibility algorithm
ednadist Nucleic acid sequence distance matrix program
ednainvar Nucleic acid sequence invariants method
ednaml Phylogenies from nucleic acid maximum likelihood
ednamlk Phylogenies from nucleic acid maximum likelihood with clock
ednapars DNA parsimony algorithm
ednapenny Penny algorithm for DNA
eprotdist Protein distance algorithm
eprotpars Protein parsimony algorithm
erestml Restriction site maximum likelihood method
eseqboot Bootstrapped sequences algorithm
fdiscboot Bootstrapped discrete sites algorithm
fdnacomp DNA compatibility algorithm
fdnadist Nucleic acid sequence distance matrix program
fdnainvar Nucleic acid sequence invariants method
fdnaml Estimate nucleotide phylogeny by maximum likelihood
fdnamlk Estimates nucleotide phylogeny by maximum likelihood
fdnapars DNA parsimony algorithm
fdnapenny Penny algorithm for DNA
fdolmove Interactive Dollo or polymorphism parsimony
ffreqboot Bootstrapped genetic frequencies algorithm
fproml Protein phylogeny by maximum likelihood
fpromlk Protein phylogeny by maximum likelihood
fprotdist Protein distance algorithm
fprotpars Protein parsimony algorithm
frestboot Bootstrapped restriction sites algorithm
frestdist Calculate distance matrix from restriction sites or fragments
frestml Restriction site maximum likelihood method
fseqboot Bootstrapped sequences algorithm
fseqbootall Bootstrapped sequences algorithm

Author(s)

This program is an EMBOSS conversion of a program written by Joe Felsenstein as part of his PHYLIP package.

Please report all bugs to the EMBOSS bug team (emboss-bug © emboss.open-bio.org) not to the original author.

History

Written (2004) - Joe Felsenstein, University of Washington.

Converted (August 2004) to an EMBASSY program by the EMBOSS team.

Target users

This program is intended to be used by everyone and everything, from naive users to embedded scripts.

Comments

None