fmix

Function

Description

Algorithm

The Camin-Sokal parsimony method explains the data by assuming that changes 0 --> 1 are allowed but not changes 1 --> 0. Wagner parsimony allows both kinds of changes. (This under the assumption that 0 is the ancestral state, though the program allows reassignment of the ancestral state, in which case we must reverse the state numbers 0 and 1 throughout this discussion). The criterion is to find the tree which requires the minimum number of changes. The Camin-Sokal method is due to Camin and Sokal (1965) and the Wagner method to Eck and Dayhoff (1966) and to Kluge and Farris (1969).

Here are the assumptions of these two methods:

1. Ancestral states are known (Camin-Sokal) or unknown (Wagner).
2. Different characters evolve independently.
3. Different lineages evolve independently.
4. Changes 0 --> 1 are much more probable than changes 1 --> 0 (Camin-Sokal) or equally probable (Wagner).
5. Both of these kinds of changes are a priori improbable over the evolutionary time spans involved in the differentiation of the group in question.
6. Other kinds of evolutionary event such as retention of polymorphism are far less probable than 0 --> 1 changes.
7. Rates of evolution in different lineages are sufficiently low that two changes in a long segment of the tree are far less probable than one change in a short segment.

That these are the assumptions of parsimony methods has been documented in a series of papers of mine: (1973a, 1978b, 1979, 1981b, 1983b, 1988b). For an opposing view arguing that the parsimony methods make no substantive assumptions such as these, see the papers by Farris (1983) and Sober (1983a, 1983b), but also read the exchange between Felsenstein and Sober (1986).

Usage

% fmix Mixed parsimony algorithm Phylip character discrete states file: mix.dat Phylip tree file (optional): Phylip mix program output file [mix.fmix]: Adding species: 1. Alpha 2. Beta 3. Gamma 4. Delta 5. Epsilon Doing global rearrangements !---------! ......... Output written to file "mix.fmix" Trees also written onto file "mix.treefile"

Go to the input files for this example
Go to the output files for this example

Example 2

% fmix -printdata -ancfile mixancfile.dat Mixed parsimony algorithm Phylip character discrete states file: mix.dat Phylip tree file (optional): Phylip mix program output file [mix.fmix]: Adding species: 1. Alpha 2. Beta 3. Gamma 4. Delta 5. Epsilon Doing global rearrangements !---------! ......... Output written to file "mix.fmix" Trees also written onto file "mix.treefile"

Go to the input files for this example
Go to the output files for this example

Command line arguments

   Standard (Mandatory) qualifiers:
  [-infile]            discretestates File containing one or more data sets
  [-intreefile]        tree       Phylip tree file (optional)
  [-outfile]           outfile    [*.fmix] Phylip mix program output file

   Additional (Optional) qualifiers (* if not always prompted):
   -weights            properties Weights file
   -ancfile            properties Ancestral states file
   -mixfile            properties Mixture file
   -method             menu       [Wagner] Choose the method to use (Values: w
                                  (Wagner); c (Camin-Sokal); m (Mixed))
*  -njumble            integer    [0] Number of times to randomise (Integer 0
                                  or more)
*  -seed               integer    [1] Random number seed between 1 and 32767
                                  (must be odd) (Integer from 1 to 32767)
   -outgrno            integer    [0] Species number to use as outgroup
                                  (Integer 0 or more)
   -threshold          float      [$(infile.discretesize)] Threshold value
                                  (Number 1.000 or more)
   -[no]trout          toggle     [Y] Write out trees to tree file
*  -outtreefile        outfile    [*.fmix] Phylip tree output file (optional)
   -printdata          boolean    [N] Print data at start of run
   -[no]progress       boolean    [Y] Print indications of progress of run
   -[no]treeprint      boolean    [Y] Print out tree
   -ancseq             boolean    [N] Print states at all nodes of tree
   -stepbox            boolean    [N] Print out steps in each character

   Advanced (Unprompted) qualifiers: (none)
   Associated qualifiers:

   "-outfile" associated qualifiers
   -odirectory3        string     Output directory

   "-outtreefile" associated qualifiers
   -odirectory         string     Output directory

   General qualifiers:
   -auto               boolean    Turn off prompts
   -stdout             boolean    Write first file to standard output
   -filter             boolean    Read first file from standard input, write
                                  first file to standard output
   -options            boolean    Prompt for standard and additional values
   -debug              boolean    Write debug output to program.dbg
   -verbose            boolean    Report some/full command line options
   -help               boolean    Report command line options. More
                                  information on associated and general
                                  qualifiers can be found with -help -verbose
   -warning            boolean    Report warnings
   -error              boolean    Report errors
   -fatal              boolean    Report fatal errors
   -die                boolean    Report dying program messages

Standard (Mandatory) qualifiers		Allowed values	Default
[-infile] (Parameter 1)	File containing one or more data sets	Discrete states file
[-intreefile] (Parameter 2)	Phylip tree file (optional)	Phylogenetic tree
[-outfile] (Parameter 3)	Phylip mix program output file	Output file	<*>.fmix
Additional (Optional) qualifiers		Allowed values	Default
-weights	Weights file	Property value(s)
-ancfile	Ancestral states file	Property value(s)
-mixfile	Mixture file	Property value(s)
-method	Choose the method to use	w (Wagner) c (Camin-Sokal) m (Mixed)	Wagner
-njumble	Number of times to randomise	Integer 0 or more	0
-seed	Random number seed between 1 and 32767 (must be odd)	Integer from 1 to 32767	1
-outgrno	Species number to use as outgroup	Integer 0 or more	0
-threshold	Threshold value	Number 1.000 or more	$(infile.discretesize)
-[no]trout	Write out trees to tree file	Toggle value Yes/No	Yes
-outtreefile	Phylip tree output file (optional)	Output file	<*>.fmix
-printdata	Print data at start of run	Boolean value Yes/No	No
-[no]progress	Print indications of progress of run	Boolean value Yes/No	Yes
-[no]treeprint	Print out tree	Boolean value Yes/No	Yes
-ancseq	Print states at all nodes of tree	Boolean value Yes/No	No
-stepbox	Print out steps in each character	Boolean value Yes/No	No
Advanced (Unprompted) qualifiers		Allowed values	Default
(none)

Input file format

(0,1) Discrete character data

These programs are intended for the use of morphological systematists who are dealing with discrete characters, or by molecular evolutionists dealing with presence-absence data on restriction sites. One of the programs (PARS) allows multistate characters, with up to 8 states, plus the unknown state symbol "?". For the others, the characters are assumed to be coded into a series of (0,1) two-state characters. For most of the programs there are two other states possible, "P", which stands for the state of Polymorphism for both states (0 and 1), and "?", which stands for the state of ignorance: it is the state "unknown", or "does not apply". The state "P" can also be denoted by "B", for "both".

There is a method invented by Sokal and Sneath (1963) for linear sequences of character states, and fully developed for branching sequences of character states by Kluge and Farris (1969) for recoding a multistate character into a series of two-state (0,1) characters. Suppose we had a character with four states whose character-state tree had the rooted form:

               1 ---> 0 ---> 2
                      |
                      |
                      V
                      3

so that 1 is the ancestral state and 0, 2 and 3 derived states. We can represent this as three two-state characters:

                Old State           New States
                --- -----           --- ------
                    0                  001
                    1                  000
                    2                  011
                    3                  101

The three new states correspond to the three arrows in the above character state tree. Possession of one of the new states corresponds to whether or not the old state had that arrow in its ancestry. Thus the first new state corresponds to the bottommost arrow, which only state 3 has in its ancestry, the second state to the rightmost of the top arrows, and the third state to the leftmost top arrow. This coding will guarantee that the number of times that states arise on the tree (in programs MIX, MOVE, PENNY and BOOT) or the number of polymorphic states in a tree segment (in the Polymorphism option of DOLLOP, DOLMOVE, DOLPENNY and DOLBOOT) will correctly correspond to what would have been the case had our programs been able to take multistate characters into account. Although I have shown the above character state tree as rooted, the recoding method works equally well on unrooted multistate characters as long as the connections between the states are known and contain no loops.

However, in the default option of programs DOLLOP, DOLMOVE, DOLPENNY and DOLBOOT the multistate recoding does not necessarily work properly, as it may lead the program to reconstruct nonexistent state combinations such as 010. An example of this problem is given in my paper on alternative phylogenetic methods (1979).

If you have multistate character data where the states are connected in a branching "character state tree" you may want to do the binary recoding yourself. Thanks to Christopher Meacham, the package contains a program, FACTOR, which will do the recoding itself. For details see the documentation file for FACTOR.

We now also have the program PARS, which can do parsimony for unordered character states.

Input files for usage example

File: mix.dat

     5    6
Alpha     110110
Beta      110000
Gamma     100110
Delta     001001
Epsilon   001110

Input files for usage example 2

File: mixancfile.dat

001??1

Output file format

If the Camin-Sokal parsimony method is invoked and the Ancestors option is also used, then the program will infer, for any character whose ancestral state is unknown ("?") whether the ancestral state 0 or 1 will give the fewest state changes. If these are tied, then it may not be possible for the program to infer the state in the internal nodes, and these will all be printed as ".". If this has happened and you want to know more about the states at the internal nodes, you will find helpful to use MOVE to display the tree and examine its interior states, as the algorithm in MOVE shows all that can be known in this case about the interior states, including where there is and is not amibiguity. The algorithm in MIX gives up more easily on displaying these states.

If the A option is not used, then the program will assume 0 as the ancestral state for those characters following the Camin-Sokal method, and will assume that the ancestral state is unknown for those characters following Wagner parsimony. If any characters have unknown ancestral states, and if the resulting tree is rooted (even by outgroup), a table will also be printed out showing the best guesses of which are the ancestral states in each character. You will find it useful to understand the difference between the Camin-Sokal parsimony criterion with unknown ancestral state and the Wagner parsimony criterion.

If the U (User Tree) option is used and more than one tree is supplied, the program also performs a statistical test of each of these trees against the best tree. This test, which is a version of the test proposed by Alan Templeton (1983) and evaluated in a test case by me (1985a). It is closely parallel to a test using log likelihood differences invented by Kishino and Hasegawa (1989), and uses the mean and variance of step differences between trees, taken across characters. If the mean is more than 1.96 standard deviations different then the trees are declared significantly different. The program prints out a table of the steps for each tree, the differences of each from the highest one, the variance of that quantity as determined by the step differences at individual characters, and a conclusion as to whether that tree is or is not significantly worse than the best one. It is important to understand that the test assumes that all the binary characters are evolving independently, which is unlikely to be true for many suites of morphological characters.

If there are more than two trees, the test done is an extension of the KHT test, due to Shimodaira and Hasegawa (1999). They pointed out that a correction for the number of trees was necessary, and they introduced a resampling method to make this correction. In the version used here the variances and covariances of the sums of steps across characters are computed for all pairs of trees. To test whether the difference between each tree and the best one is larger than could have been expected if they all had the same expected number of steps, numbers of steps for all trees are sampled with these covariances and equal means (Shimodaira and Hasegawa's "least favorable hypothesis"), and a P value is computed from the fraction of times the difference between the tree's value and the lowest number of steps exceeds that actually observed. Note that this sampling needs random numbers, and so the program will prompt the user for a random number seed if one has not already been supplied. With the two-tree KHT test no random numbers are used.

In either the KHT or the SH test the program prints out a table of the number of steps for each tree, the differences of each from the lowest one, the variance of that quantity as determined by the differences of the numbers of steps at individual characters, and a conclusion as to whether that tree is or is not significantly worse than the best one.

If option 6 is left in its default state the trees found will be written to a tree file, so that they are available to be used in other programs. If the program finds multiple trees tied for best, all of these are written out onto the output tree file. Each is followed by a numerical weight in square brackets (such as [0.25000]). This is needed when we use the trees to make a consensus tree of the results of bootstrapping or jackknifing, to avoid overrepresenting replicates that find many tied trees.

Output files for usage example

File: mix.fmix

Mixed parsimony algorithm, version 3.67

Wagner parsimony method

               


     4 trees in all found




           +--Epsilon   
     +-----4  
     !     +--Gamma     
  +--2  
  !  !     +--Delta     
--1  +-----3  
  !        +--Beta      
  !  
  +-----------Alpha     

  remember: this is an unrooted tree!


requires a total of      9.000





     +--------Gamma     
     !  
  +--2     +--Epsilon   
  !  !  +--4  
  !  +--3  +--Delta     
--1     !  
  !     +-----Beta      
  !  
  +-----------Alpha     

  remember: this is an unrooted tree!


requires a total of      9.000





     +--------Epsilon   
  +--4  
  !  !  +-----Gamma     
  !  +--2  
--1     !  +--Delta     
  !     +--3  
  !        +--Beta      
  !  
  +-----------Alpha     

  remember: this is an unrooted tree!


requires a total of      9.000





     +--------Gamma     
  +--2  
  !  !  +-----Epsilon   
  !  +--4  
--1     !  +--Delta     
  !     +--3  
  !        +--Beta      
  !  
  +-----------Alpha     

  remember: this is an unrooted tree!


requires a total of      9.000

File: mix.treefile

(((Epsilon,Gamma),(Delta,Beta)),Alpha)[0.2500];
((Gamma,((Epsilon,Delta),Beta)),Alpha)[0.2500];
((Epsilon,(Gamma,(Delta,Beta))),Alpha)[0.2500];
((Gamma,(Epsilon,(Delta,Beta))),Alpha)[0.2500];

Output files for usage example 2

File: mix.fmix

Mixed parsimony algorithm, version 3.67

5 species, 6 characters

Wagner parsimony method


Name         Characters
----         ----------

Alpha        11011 0
Beta         11000 0
Gamma        10011 0
Delta        00100 1
Epsilon      00111 0


    Ancestral states:
             001?? 1


One most parsimonious tree found:




  +-----------Delta     
--3  
  !  +--------Epsilon   
  +--4  
     !  +-----Gamma     
     +--2  
        !  +--Beta      
        +--1  
           +--Alpha     


requires a total of      8.000

best guesses of ancestral states:
       0 1 2 3 4 5 6 7 8 9
     *--------------------
    0!   0 0 1 ? ? 1      

File: mix.treefile

(Delta,(Epsilon,(Gamma,(Beta,Alpha))));

Data files

Notes

References

Warnings

Diagnostic Error Messages

Exit status

Known bugs

See also

Author(s)

Although we take every care to ensure that the results of the EMBOSS version are identical to those from the original package, we recommend that you check your inputs give the same results in both versions before publication.

Please report all bugs in the EMBOSS version to the EMBOSS bug team, not to the original author.

History

Converted (August 2004) to an EMBASSY program by the EMBOSS team.

Target users