fprotdist

Wiki

Please help by correcting and extending the Wiki pages.

Function

Description

Algorithm

The program reads in protein sequences and writes an output file containing the distance matrix or similarity table. The five models of amino acid substitution are one which is based on the Jones, Taylor and Thornton (1992) model of amino acid change, the PMB model (Veerassamy, Smith and Tillier, 2004) which is derived from the Blocks database of conserved protein motifs, one based on the PAM matrixes of Margaret Dayhoff, one due to Kimura (1983) which approximates it based simply on the fraction of similar amino acids, and one based on a model in which the amino acids are divided up into groups, with change occurring based on the genetic code but with greater difficulty of changing between groups. The program correctly takes into account a variety of sequence ambiguities.

The five methods are:

(1) The Dayhoff PAM matrix. This uses Dayhoff's PAM 001 matrix from Dayhoff (1979), page 348. The PAM model is an empirical one that scales probabilities of change from one amino acid to another in terms of a unit which is an expected 1% change between two amino acid sequences. The PAM 001 matrix is used to make a transition probability matrix which allows prediction of the probability of changing from any one amino acid to any other, and also predicts equilibrium amino acid composition. The program assumes that these probabilities are correct and bases its computations of distance on them. The distance that is computed is scaled in units of expected fraction of amino acids changed. This is a unit such that 1.0 is 100 PAM's.

(2) The Jones-Taylor-Thornton model. This is similar to the Dayhoff PAM model, except that it is based on a recounting of the number of observed changes in amino acids by Jones, Taylor, and Thornton (1992). They used a much larger sample of protein sequences than did Dayhoff. The distance is scaled in units of the expected fraction of amino acids changed (100 PAM's). Because its sample is so much larger this model is to be preferred over the original Dayhoff PAM model. It is the default model in this program.

(3) The PMB (Probability Matrix from Blocks) model. This is derived using the Blocks database of conserved protein motifs. It will be described in a paper by Veerassamy, Smith and Tillier (2004). Elisabeth Tillier kindly made the matrices available for this model.

(4) Kimura's distance. This is a rough-and-ready distance formula for approximating PAM distance by simply measuring the fraction of amino acids, p, that differs between two sequences and computing the distance as (Kimura, 1983) D = - loge ( 1 - p - 0.2 p2 ). This is very quick to do but has some obvious limitations. It does not take into account which amino acids differ or to what amino acids they change, so some information is lost. The units of the distance measure are fraction of amino acids differing, as also in the case of the PAM distance. If the fraction of amino acids differing gets larger than 0.8541 the distance becomes infinite.

(5) The Categories distance. This is my own concoction. I imagined a nucleotide sequence changing according to Kimura's 2-parameter model, with the exception that some changes of amino acids are less likely than others. The amino acids are grouped into a series of categories. Any base change that does not change which category the amino acid is in is allowed, but if an amino acid changes category this is allowed only a certain fraction of the time. The fraction is called the "ease" and there is a parameter for it, which is 1.0 when all changes are allowed and near 0.0 when changes between categories are nearly impossible.

In this option I have allowed the user to select the Transition/Transversion ratio, which of several genetic codes to use, and which categorization of amino acids to use. There are three of them, a somewhat random sample:

1. The George-Hunt-Barker (1988) classification of amino acids,
2. A classification provided by my colleague Ben Hall when I asked him for one,
3. One I found in an old "baby biochemistry" book (Conn and Stumpf, 1963), which contains most of the biochemistry I was ever taught, and all that I ever learned.

Interestingly enough, all of them are consisten with the same linear ordering of amino acids, which they divide up in different ways. For the Categories model I have set as default the George/Hunt/Barker classification with the "ease" parameter set to 0.457 which is approximately the value implied by the empirical rates in the Dayhoff PAM matrix.

The method uses, as I have noted, Kimura's (1980) 2-parameter model of DNA change. The Kimura "2-parameter" model allows for a difference between transition and transversion rates. Its transition probability matrix for a short interval of time is:

              To:     A        G        C        T
                   ---------------------------------
               A  | 1-a-2b     a         b       b
       From:   G  |   a      1-a-2b      b       b
               C  |   b        b       1-a-2b    a
               T  |   b        b         a     1-a-2b

where a is u dt, the product of the rate of transitions per unit time and dt is the length dt of the time interval, and b is v dt, the product of half the rate of transversions (i.e., the rate of a specific transversion) and the length dt of the time interval.

Each distance that is calculated is an estimate, from that particular pair of species, of the divergence time between those two species. The Kimura distance is straightforward to compute. The other two are considerably slower, and they look at all positions, and find that distance which makes the likelihood highest. This likelihood is in effect the length of the internal branch in a two-species tree that connects these two species. Its likelihood is just the product, under the model, of the probabilities of each position having the (one or) two amino acids that are actually found. This is fairly slow to compute.

The computation proceeds from an eigenanalysis (spectral decomposition) of the transition probability matrix. In the case of the PAM 001 matrix the eigenvalues and eigenvectors are precomputed and are hard-coded into the program in over 400 statements. In the case of the Categories model the program computes the eigenvalues and eigenvectors itself, which will add a delay. But the delay is independent of the number of species as the calculation is done only once, at the outset.

The actual algorithm for estimating the distance is in both cases a bisection algorithm which tries to find the point at which the derivative os the likelihood is zero. Some of the kinds of ambiguous amino acids like "glx" are correctly taken into account. However, gaps are treated as if they are unkown nucleotides, which means those positions get dropped from that particular comparison. However, they are not dropped from the whole analysis. You need not eliminate regions containing gaps, as long as you are reasonably sure of the alignment there.

Note that there is an assumption that we are looking at all positions, including those that have not changed at all. It is important not to restrict attention to some positions based on whether or not they have changed; doing that would bias the distances by making them too large, and that in turn would cause the distances to misinterpret the meaning of those positions that had changed.

The program can now correct distances for unequal rates of change at different amino acid positions. This correction, which was introduced for DNA sequences by Jin and Nei (1990), assumes that the distribution of rates of change among amino acid positions follows a Gamma distribution. The user is asked for the value of a parameter that determines the amount of variation of rates among amino acid positions. Instead of the more widely-known coefficient alpha, PROTDIST uses the coefficient of variation (ratio of the standard deviation to the mean) of rates among amino acid positions. . So if there is 20% variation in rates, the CV is is 0.20. The square of the C.V. is also the reciprocal of the better-known "shape parameter", alpha, of the Gamma distribution, so in this case the shape parameter alpha = 1/(0.20*0.20) = 25. If you want to achieve a particular value of alpha, such as 10, you will want to use a CV of 1/sqrt(100) = 1/10 = 0.1.

In addition to the five distance calculations, the program can also compute a table of similarities between amino acid sequences. These values are the fractions of amino acid positions identical between the sequences. The diagonal values are 1.0000. No attempt is made to count similarity of nonidentical amino acids, so that no credit is given for having (for example) different hydrophobic amino acids at the corresponding positions in the two sequences. This option has been requested by many users, who need it for descriptive purposes. It is not intended that the table be used for inferring the tree.

Usage

% fprotdist Protein distance algorithm Input (aligned) protein sequence set(s): protdist.dat Phylip distance matrix output file [protdist.fprotdist]: Computing distances: Alpha Beta . Gamma .. Delta ... Epsilon .... Output written to file "protdist.fprotdist" Done.

Go to the input files for this example
Go to the output files for this example

Command line arguments

Protein distance algorithm
Version: EMBOSS:6.3.0

   Standard (Mandatory) qualifiers:
  [-sequence]          seqsetall  File containing one or more sequence
                                  alignments
  [-outfile]           outfile    [*.fprotdist] Phylip distance matrix output
                                  file

   Additional (Optional) qualifiers (* if not always prompted):
   -ncategories        integer    [1] Number of substitution rate categories
                                  (Integer from 1 to 9)
*  -rate               array      Rate for each category
*  -categories         properties File of substitution rate categories
   -weights            properties Weights file
   -method             menu       [j] Choose the method to use (Values: j
                                  (Jones-Taylor-Thornton matrix); h
                                  (Henikoff/Tiller PMB matrix); d (Dayhoff PAM
                                  matrix); k (Kimura formula); s (Similarity
                                  table); c (Categories model))
*  -gamma              menu       [c] Rate variation among sites (Values: g
                                  (Gamma distributed rates); i
                                  (Gamma+invariant sites); c (Constant rate))
*  -gammacoefficient   float      [1] Coefficient of variation of substitution
                                  rate among sites (Number 0.001 or more)
*  -invarcoefficient   float      [1] Coefficient of variation of substitution
                                  rate among sites (Number 0.001 or more)
*  -aacateg            menu       [G] Choose the category to use (Values: G
                                  (George/Hunt/Barker (Cys), (Met Val Leu
                                  Ileu), (Gly Ala Ser Thr Pro)); C (Chemical
                                  (Cys Met), (Val Leu Ileu Gly Ala Ser Thr),
                                  (Pro)); H (Hall (Cys), (Met Val Leu Ileu),
                                  (Gly Ala Ser Thr),(Pro)))
*  -whichcode          menu       [u] Which genetic code (Values: u
                                  (Universal); c (Ciliate); m (Universal
                                  mitochondrial); v (Vertebrate
                                  mitochondrial); f (Fly mitochondrial); y
                                  (Yeast mitochondrial))
*  -ease               float      [0.457] Prob change category (1.0=easy)
                                  (Number from 0.000 to 1.000)
*  -ttratio            float      [2.0] Transition/transversion ratio (Number
                                  0.000 or more)
*  -basefreq           array      [0.25 0.25 0.25 0.25] Base frequencies for A
                                  C G T/U (use blanks to separate)
   -printdata          boolean    [N] Print data at start of run
   -[no]progress       boolean    [Y] Print indications of progress of run

   Advanced (Unprompted) qualifiers: (none)
   Associated qualifiers:

   "-sequence" associated qualifiers
   -sbegin1            integer    Start of each sequence to be used
   -send1              integer    End of each sequence to be used
   -sreverse1          boolean    Reverse (if DNA)
   -sask1              boolean    Ask for begin/end/reverse
   -snucleotide1       boolean    Sequence is nucleotide
   -sprotein1          boolean    Sequence is protein
   -slower1            boolean    Make lower case
   -supper1            boolean    Make upper case
   -sformat1           string     Input sequence format
   -sdbname1           string     Database name
   -sid1               string     Entryname
   -ufo1               string     UFO features
   -fformat1           string     Features format
   -fopenfile1         string     Features file name

   "-outfile" associated qualifiers
   -odirectory2        string     Output directory

   General qualifiers:
   -auto               boolean    Turn off prompts
   -stdout             boolean    Write first file to standard output
   -filter             boolean    Read first file from standard input, write
                                  first file to standard output
   -options            boolean    Prompt for standard and additional values
   -debug              boolean    Write debug output to program.dbg
   -verbose            boolean    Report some/full command line options
   -help               boolean    Report command line options and exit. More
                                  information on associated and general
                                  qualifiers can be found with -help -verbose
   -warning            boolean    Report warnings
   -error              boolean    Report errors
   -fatal              boolean    Report fatal errors
   -die                boolean    Report dying program messages
   -version            boolean    Report version number and exit

Qualifier	Type	Description	Allowed values	Default
Standard (Mandatory) qualifiers
[-sequence] (Parameter 1)	seqsetall	File containing one or more sequence alignments	Readable sets of sequences	Required
[-outfile] (Parameter 2)	outfile	Phylip distance matrix output file	Output file	<*>.fprotdist
Additional (Optional) qualifiers
-ncategories	integer	Number of substitution rate categories	Integer from 1 to 9	1
-rate	array	Rate for each category	List of floating point numbers
-categories	properties	File of substitution rate categories	Property value(s)
-weights	properties	Weights file	Property value(s)
-method	list	Choose the method to use	j (Jones-Taylor-Thornton matrix) h (Henikoff/Tiller PMB matrix) d (Dayhoff PAM matrix) k (Kimura formula) s (Similarity table) c (Categories model)	j
-gamma	list	Rate variation among sites	g (Gamma distributed rates) i (Gamma+invariant sites) c (Constant rate)	c
-gammacoefficient	float	Coefficient of variation of substitution rate among sites	Number 0.001 or more	1
-invarcoefficient	float	Coefficient of variation of substitution rate among sites	Number 0.001 or more	1
-aacateg	list	Choose the category to use	G (George/Hunt/Barker (Cys), (Met Val Leu Ileu), (Gly Ala Ser Thr Pro)) C (Chemical (Cys Met), (Val Leu Ileu Gly Ala Ser Thr), (Pro)) H (Hall (Cys), (Met Val Leu Ileu), (Gly Ala Ser Thr),(Pro))	G
-whichcode	list	Which genetic code	u (Universal) c (Ciliate) m (Universal mitochondrial) v (Vertebrate mitochondrial) f (Fly mitochondrial) y (Yeast mitochondrial)	u
-ease	float	Prob change category (1.0=easy)	Number from 0.000 to 1.000	0.457
-ttratio	float	Transition/transversion ratio	Number 0.000 or more	2.0
-basefreq	array	Base frequencies for A C G T/U (use blanks to separate)	List of floating point numbers	0.25 0.25 0.25 0.25
-printdata	boolean	Print data at start of run	Boolean value Yes/No	No
-[no]progress	boolean	Print indications of progress of run	Boolean value Yes/No	Yes
Advanced (Unprompted) qualifiers
(none)
Associated qualifiers
"-sequence" associated seqsetall qualifiers
-sbegin1 -sbegin_sequence	integer	Start of each sequence to be used	Any integer value	0
-send1 -send_sequence	integer	End of each sequence to be used	Any integer value	0
-sreverse1 -sreverse_sequence	boolean	Reverse (if DNA)	Boolean value Yes/No	N
-sask1 -sask_sequence	boolean	Ask for begin/end/reverse	Boolean value Yes/No	N
-snucleotide1 -snucleotide_sequence	boolean	Sequence is nucleotide	Boolean value Yes/No	N
-sprotein1 -sprotein_sequence	boolean	Sequence is protein	Boolean value Yes/No	N
-slower1 -slower_sequence	boolean	Make lower case	Boolean value Yes/No	N
-supper1 -supper_sequence	boolean	Make upper case	Boolean value Yes/No	N
-sformat1 -sformat_sequence	string	Input sequence format	Any string
-sdbname1 -sdbname_sequence	string	Database name	Any string
-sid1 -sid_sequence	string	Entryname	Any string
-ufo1 -ufo_sequence	string	UFO features	Any string
-fformat1 -fformat_sequence	string	Features format	Any string
-fopenfile1 -fopenfile_sequence	string	Features file name	Any string
"-outfile" associated outfile qualifiers
-odirectory2 -odirectory_outfile	string	Output directory	Any string
General qualifiers
-auto	boolean	Turn off prompts	Boolean value Yes/No	N
-stdout	boolean	Write first file to standard output	Boolean value Yes/No	N
-filter	boolean	Read first file from standard input, write first file to standard output	Boolean value Yes/No	N
-options	boolean	Prompt for standard and additional values	Boolean value Yes/No	N
-debug	boolean	Write debug output to program.dbg	Boolean value Yes/No	N
-verbose	boolean	Report some/full command line options	Boolean value Yes/No	Y
-help	boolean	Report command line options and exit. More information on associated and general qualifiers can be found with -help -verbose	Boolean value Yes/No	N
-warning	boolean	Report warnings	Boolean value Yes/No	Y
-error	boolean	Report errors	Boolean value Yes/No	Y
-fatal	boolean	Report fatal errors	Boolean value Yes/No	Y
-die	boolean	Report dying program messages	Boolean value Yes/No	Y
-version	boolean	Report version number and exit	Boolean value Yes/No	N

Input file format

Input files for usage example

File: protdist.dat

   5   13
Alpha     AACGTGGCCACAT
Beta      AAGGTCGCCACAC
Gamma     CAGTTCGCCACAA
Delta     GAGATTTCCGCCT
Epsilon   GAGATCTCCGCCC

Output file format

If the similarity table is selected, the table that is produced is not in a format that can be used as input to the distance matrix programs. it has a heading, and the species names are also put at the tops of the columns of the table (or rather, the first 8 characters of each species name is there, the other two characters omitted to save space). There is not an option to put the table into a format that can be read by the distance matrix programs, nor is there one to make it into a table of fractions of difference by subtracting the similarity values from 1. This is done deliberately to make it more difficult for the use to use these values to construct trees. The similarity values are not corrected for multiple changes, and their use to construct trees (even after converting them to fractions of difference) would be wrong, as it would lead to severe conflict between the distant pairs of sequences and the close pairs of sequences.

If the option to print out the data is selected, the output file will precede the data by more complete information on the input and the menu selections. The output file begins by giving the number of species and the number of characters, and the identity of the distance measure that is being used.

In the Categories model of substitution, the distances printed out are scaled in terms of expected numbers of substitutions, counting both transitions and transversions but not replacements of a base by itself, and scaled so that the average rate of change is set to 1.0. For the Dayhoff PAM and Kimura models the distance are scaled in terms of the expected numbers of amino acid substitutions per site. Of course, when a branch is twice as long this does not mean that there will be twice as much net change expected along it, since some of the changes may occur in the same site and overlie or even reverse each other. The branch lengths estimates here are in terms of the expected underlying numbers of changes. That means that a branch of length 0.26 is 26 times as long as one which would show a 1% difference between the protein (or nucleotide) sequences at the beginning and end of the branch. But we would not expect the sequences at the beginning and end of the branch to be 26% different, as there would be some overlaying of changes.

One problem that can arise is that two or more of the species can be so dissimilar that the distance between them would have to be infinite, as the likelihood rises indefinitely as the estimated divergence time increases. For example, with the Kimura model, if the two sequences differ in 85.41% or more of their positions then the estimate of divergence time would be infinite. Since there is no way to represent an infinite distance in the output file, the program regards this as an error, issues a warning message indicating which pair of species are causing the problem, and computes a distance of -1.0.

Output files for usage example

File: protdist.fprotdist

    5
Alpha       0.000000  0.331834  0.628142  1.036660  1.365098
Beta        0.331834  0.000000  0.377406  1.102689  0.682218
Gamma       0.628142  0.377406  0.000000  0.979550  0.866781
Delta       1.036660  1.102689  0.979550  0.000000  0.227515
Epsilon     1.365098  0.682218  0.866781  0.227515  0.000000

Data files

Notes

References

Warnings

Diagnostic Error Messages

Exit status

Known bugs

See also

Author(s)

Please report all bugs to the EMBOSS bug team (emboss-bug © emboss.open-bio.org) not to the original author.

History

Converted (August 2004) to an EMBASSY program by the EMBOSS team.

Target users